Search found 81 matches
- Thu, Jul 26 2018, 2:57AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Profibus
- Replies: 4
- Views: 8312
Re: Profibus
Hello Rayno I took the pci card out about 3 times, spray and clean it with "Electro Kleen". As soon as the super Control start up, the fault light on the Siemens profibus (encoder) comes on. This is also a C40 model, that Jireh bought new from Thermwood in 2006. I tried to move the pci car...
- Wed, Jul 25 2018, 1:30PM
- Forum: Thermwood 3-Axis Machinery
- Topic: Profibus
- Replies: 4
- Views: 8312
Profibus
Good evening. We are getting the following error: Siemens feed module fault (via profibus) Z axis feed module faulted. Also on the Siemens encoder inside the cabinet the red light is on. If I unplug the profibus cable from the pci card the red fault light on the encoder stay off. Any ideas? The erro...
- Thu, Mar 10 2016, 10:52AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Job seeker
- Replies: 1
- Views: 10119
Job seeker
Hi all. I do not know how many South Africans is still on the forum, but you never know. I am currently employed but is looking for a new job. I have the following experience. 10 years operating and programming a Thermwood C40 cnc machine. I know e-cabinets inside out. 10 years working with Bobcad c...
- Wed, Mar 09 2016, 1:41AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Floating "No Video Input" on power up
- Replies: 3
- Views: 7369
Re: Floating "No Video Input" on power up
If you have a on board video card then swap the motherboard out just to see if it work, if you PCI graphics card then swap that out. Seems to me you have faulty motherboard.
- Fri, Mar 04 2016, 7:47AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Out of space on control nest computer
- Replies: 1
- Views: 5233
Re: Out of space on control nest computer
Good afternoon.
First they can try clean up the c: drive. Delete all temp files and internet files. Uninstall programs that is installed on the c: drive that they do not use anymore.
Cheers
First they can try clean up the c: drive. Delete all temp files and internet files. Uninstall programs that is installed on the c: drive that they do not use anymore.
Cheers
- Tue, Mar 03 2015, 12:19AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Hard Disk Drive
- Replies: 2
- Views: 5888
Re: Hard Disk Drive
Will do that thank you.
- Mon, Mar 02 2015, 8:57AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Hard Disk Drive
- Replies: 2
- Views: 5888
Hard Disk Drive
Good afternoon. Got our machine in 2006, and our HDD has gone corrupt in 2015 (failure). We bought a SSD (128GB) I install it and boot with the recovery cd that we got with the machine in 2006. So now it's got Win XP Pro on, but I can not activate it, it just take you to a windows webpage where you ...
- Fri, May 09 2014, 5:59AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Furniture Carving RP-FR-FN0001
- Replies: 2
- Views: 5022
Re: Furniture Carving RP-FR-FN0001
So there is no explanation for it, or something that I can do about it? They should take it out of the carving library then so someone does not have to go red face back to the client and tell them I can not machine it.
Cheers
Cheers
- Tue, May 06 2014, 10:30AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Furniture Carving RP-FR-FN0001
- Replies: 2
- Views: 5022
Furniture Carving RP-FR-FN0001
Good afternoon. Try to do this carving on our machine, but it run dead slow (feed speeds) it will take a week for it to complete. My feed rate override is set at 100%. It is like there is a G809 or G810 in there some where. The Feedprogram is set at 200. I suppose that is iches. Any help or advise? ...
- Thu, Mar 06 2014, 6:54AM
- Forum: Thermwood 3-Axis Machinery
- Topic: CNC Cutters
- Replies: 2
- Views: 5337
CNC Cutters
Good afternoon. Anybody from South Africa still hanging around on this forum? If so, where do you get your cutters from? Leuco has take over the Onsrud sales in SA, but if you contact them to order cutters they do not even understand the term up-cut or downcut. They have one! diamond cutter in this ...
- Tue, May 14 2013, 8:32AM
- Forum: Thermwood 3-Axis Machinery
- Topic: EMER STOP
- Replies: 6
- Views: 9794
Re: EMER STOP
Good afternoon Daniel, I have send you the .cnc files. Just another thing that is also start to happen, with this other problem. When there is a tool change some times, just after picking up the tool, when the z axis goes up and the router start to spin ...then the same thing happen, "clack&quo...
- Tue, May 14 2013, 2:44AM
- Forum: Thermwood 3-Axis Machinery
- Topic: EMER STOP
- Replies: 6
- Views: 9794
Re: EMER STOP
Good morning Daniel I have nest and write the code of a job with CN. I have cut the hole job....start scaning the flip-ops (tool no 3 is my dado cutter for the flip-ops) first scan...Tool 2 is in the head push start change to tool 3 and did the flip cutting, no problem, so now tool 3 is in the head....
- Mon, May 13 2013, 3:32AM
- Forum: Thermwood 3-Axis Machinery
- Topic: EMER STOP
- Replies: 6
- Views: 9794
EMER STOP
Good Morning The machine is starting to do this more often everyday now, well its now to a stage where its doing it every time. When I ran a program, and the tool in the program is the same that is in the router head the following happen. You hear a "clack" sound at the router head, it goe...
- Wed, Feb 27 2013, 4:22AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Has any one cut Polypropylene?
- Replies: 8
- Views: 9602
Re: Has any one cut Polypropylene?
Good Morning Scot Imperial!! Then you are going to have to make more changes. My tool 990(fly-cutter) is in the same tool holder (B1) than my tool number 1(T1). If "T1" is not in the spindle head, I do the following: F5, F3..(new part program), give it any name, then hit "enter" ...
- Tue, Feb 26 2013, 8:17AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Has any one cut Polypropylene?
- Replies: 8
- Views: 9602
Re: Has any one cut Polypropylene?
Good afternoon ,Scot I have modify the original fly-cut program, so it ask you the length(x-axxis) and width(y-axxis) of the material you want to fly-cut. It works from the G902, so your material must be in the fence location.It works like the original program, the machine index over the table, you ...