Thermwood / eCabinet Systems

Hi Stuart

I found the same problem. But what i do is put a negative in. So like -20mm in the left and right boxes. that kicks the holes out past the edges and you end up with just the centre holes.

Cheers

Thom

Hi Neville

I batch each area, so 1 batch/file will be called KITCHEN and then another would be called BATHROOM 1 or Laundry etc. Since the name comes up on the label as well as the colour symbol it makes it easier to sort out.

Hope this helps

Cheers

Thom

Or even eCabinets 7?

Hi All

The bottom Auto lube has stopped dripping, the top 1 is fine, there is air in the container where the lube is as its bubbling away. but no matter what there is no drips coming out the top.

Could it be blocked? if so how do i clean it or has it just failed and i need a new 1?

This is ...

Hi

Just wondering if anyone uses these to measure up jobs? There are ones that have blue tooth and work with your iphone or ipad. Crazy stuff!


http://www.accurate.net.nz/lasertape.htm


Cheers

Thom

sweet!!!

Patch 3 fixed it! cheers guys!

It seems to be the grouping the doors together is a problem. Its ok when nesting in ecab, but as soon as its down at the machine it goes back to being straight grain.

Hi

Ive done a nest with cross grain doors. yet when it nests its not crossed grained the doors run with the grain. Its ticked in ecab as grain and in the nest. Im running V6 Build 10 and RN 5.59 patch 2

Cheers

Thom

Hello!

What a day its been! Nearly every sheet, the tool change for the B4 Tool its got stuck in the router, I've cleaned the tool, inside the cone, changed the collet and the cutter and still nearly every sheet it gets stuck.

It started off abit warm just on the knob, now 8 hours later pretty ...

Scott

There is a program that reads the CNC code and tells you how long it will take to cut. its called Cut time from www.cncautomation.com/en/software, Its fantasic!

Cheers

Thom

Sorry I mean a 23mm Spoil Board. I call it different things. lol Like the 6mm waste board Dennis calls it, we call it a sacro.

Hello!
2 Things:

How thick is your waste board?

AND

Just wondering if any1 can offer some advise. I used 25mm for my Waste board and now its down to 23mm, Thinking it'll last longer than if i used an 18mm Waste board and machined down to 16mm.

My question is: Will i loose much vacuum using a ...

Meet up at thermwood stand ae?

Yep Im gonna be there. Will be good to meet up.

Hello!

What is the way to work out the perfect ramp in length for a cutter? Im Using a 12.7mm 2 Flute Cutter.

Cheers

Thom Davies