fin to wall toe board

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Post Reply
Jack Duren
Junior Member
Posts: 44
Joined: Mon, Apr 10 2006, 3:41PM
Location: Odessa, MO

fin to wall toe board

Post by Jack Duren »

I have a finished left cabinet with a right wall end. I have a frame hangs over 1/2 on the wall end, but unable to extend the toe to match. Simple fix?
Jack Duren
Junior Member
Posts: 44
Joined: Mon, Apr 10 2006, 3:41PM
Location: Odessa, MO

Re: fin to wall toe board

Post by Jack Duren »

toe board save.jpg
Joe Soto
Guru Member
Posts: 367
Joined: Thu, May 19 2005, 7:50PM
Company Name: Fancyridge Wood Products LLC
Location: Greensburg, Ky

Re: fin to wall toe board

Post by Joe Soto »

Set the right scribe of the toe kick to -.5 plus whatever your side material thickness is. You will have to cut the toe notch deeper manually or with the part editor. Just for future reference you will probably get more responses quicker if you post questions like this in the software area.
Jack Duren
Junior Member
Posts: 44
Joined: Mon, Apr 10 2006, 3:41PM
Location: Odessa, MO

Re: fin to wall toe board

Post by Jack Duren »

Not sure where you are seeing this option?
Jack Duren
Junior Member
Posts: 44
Joined: Mon, Apr 10 2006, 3:41PM
Location: Odessa, MO

Re: fin to wall toe board

Post by Jack Duren »

think I'm getting it..
Jack Duren
Junior Member
Posts: 44
Joined: Mon, Apr 10 2006, 3:41PM
Location: Odessa, MO

Re: fin to wall toe board

Post by Jack Duren »

Thx... Working out one problem at a time.

On to problem number two.
ToeBoard save1.jpg
Post Reply