Planter box

Place to discuss only the "Design Sharing" aspects of the eCabinet Systems software.

Moderators: Jason Susnjara, Clint Buechlein

Post Reply
tim lucas
Guru Member
Posts: 322
Joined: Thu, Nov 29 2007, 5:18PM
Company Name: Tim Lucas Custom Woodworks LLC
Country: UNITED STATES
Location: bell, florida
Contact:

Planter box

Post by tim lucas »

It is spring time and I made a couple planter boxes for my wife out of solid cedar
Using ecabinets and constraint manager, the box is set up so it can be resized.
for the pegs to hold it together I use some of the scrap 1/4" x 1/4" and about 1" each.
let me know if you have any problems with it so I can adjust my thinking :D
Tim
Planter Box.jpg
Planter Box.jpg (5.85 KiB) Viewed 20738 times
Planter Box.hsf
(572.02 KiB) Downloaded 1378 times
Tim Lucas Custom Woodworks LLC
www.TLCW.us
Post Reply