Constraint manager issues

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Post Reply
Scott Marshburn
Guru Member
Posts: 837
Joined: Sat, Mar 05 2011, 7:29AM
Company Name: Heritage WoodWorks
Country: UNITED STATES
Location: Jacksonville Nc
Contact:

Constraint manager issues

Post by Scott Marshburn »

This Just started happening today while trying to constrain holes. When I set the constraint rather than showing the constraint I get this bar code-looking thing. see the attached image. Has anyone experienced anything like this? If so how do I go about fixing it?
Attachments
Constraint.jpg
Donald Thomson
Guru Member
Posts: 833
Joined: Thu, May 14 2009, 11:41PM
Company Name: Diamond Lake Custom Woodworks
Location: Newport, WA
Contact:

Re: Constraint manager issues

Post by Donald Thomson »

Might try adjusting your text size.
Sincerely,

Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
Scott Marshburn
Guru Member
Posts: 837
Joined: Sat, Mar 05 2011, 7:29AM
Company Name: Heritage WoodWorks
Country: UNITED STATES
Location: Jacksonville Nc
Contact:

Re: Constraint manager issues

Post by Scott Marshburn »

Thanks, Donald I tried that but I still get the same results.
Scott Marshburn
Guru Member
Posts: 837
Joined: Sat, Mar 05 2011, 7:29AM
Company Name: Heritage WoodWorks
Country: UNITED STATES
Location: Jacksonville Nc
Contact:

Re: Constraint manager issues

Post by Scott Marshburn »

Ok. I was able to fix my problem. I made sure that all of my drivers were up to date. I also made sure that I had the latest windows 10 update. I still had the same issue. I then loaded the cabinet/cabinets that were giving me the problem. I deleted all of the constraints as well as the geometry sets and started from scratch all worked as expected. I am not sure which was the culprit here the drivers or the windows update or both but everything seems to be working now.
Rick Deskins
Thermwood Team
Posts: 857
Joined: Tue, May 17 2005, 12:47PM
Company Name: Thermwood
Country: UNITED STATES
Location: Thermwood

Re: Constraint manager issues

Post by Rick Deskins »

It may have been a incorrect font setting. Font settings can be changed by using the A icon in the toolbar.
Rick Deskins
eCabinet Systems Programmer
Dell Precision / Xeon E3-1240 / 8GB RAM/ AMD FirePro V4900
Post Reply