Blanking out the KD fastener in lock tenon

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Gene Davis
Junior Member
Posts: 61
Joined: Sat, Sep 02 2017, 7:30PM
Company Name: Gene Davis Builder
Country: UNITED STATES

Blanking out the KD fastener in lock tenon

Postby Gene Davis » Mon, Sep 19 2022, 4:22PM

How can I make a lock tenon joint but without any fastener prep hole or mortise?

I do lock tenon with ZipR screws done with 1/8 dia. thru holes at each fastener point, the pattern being a hole.

For a basecab with tray divider partitions, we see no need for screwing thru to fix them in place, and ignore the thru holes. How can we delete the holes (or have then not generated in the file.)

Mark McCallum
Guru Member
Posts: 507
Joined: Thu, Jun 16 2005, 7:53PM
Location: Sydney Aust

Re: Blanking out the KD fastener in lock tenon

Postby Mark McCallum » Tue, Sep 20 2022, 7:53AM

For a basecab with tray divider partitions, we see no need for screwing thru to fix them in place, and ignore the thru holes. How can we delete the holes (or have then not generated in the file.)
Perhaps apply a Blind Dado to those edges, I think Blind dados don't have any Kds.

Kerry Fullington
Wizard Member
Posts: 4718
Joined: Mon, May 09 2005, 7:33PM
Company Name: Double E Cabinets
Country: UNITED STATES
Location: Amarillo, TX

Re: Blanking out the KD fastener in lock tenon

Postby Kerry Fullington » Thu, Sep 22 2022, 9:34AM

Gene,
I created a KD hole pattern with no depth and called it NO RTA. I apply this as the KD fastener to parts I don't want a hole drilled.

For the pattern I just used the 1/8" through drill pattern like you are using and gave it no depth.


Return to “eCabinet Systems Software”

Who is online

Users browsing this forum: Bing [Bot] and 12 guests