Toe board and notch

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Post Reply
Jack Duren
Junior Member
Posts: 44
Joined: Mon, Apr 10 2006, 3:41PM
Location: Odessa, MO

Toe board and notch

Post by Jack Duren »

Trying to get the toe board and notch to line up to the face. Back and forth. I'm missing something.
toe board save2.jpg
Mark McCallum
Guru Member
Posts: 507
Joined: Thu, Jun 16 2005, 7:53PM
Location: Sydney Aust

Re: Toe board and notch

Post by Mark McCallum »

I don't use face frames, so I am probably missing the point, but just a thought bump if you are stuck.
The setting in the attached picture seems to adjust that.
Same thickness as shelf material. :|
Attachments
bottom rail.jpg
Kerry Fullington
Wizard Member
Posts: 4718
Joined: Mon, May 09 2005, 7:33PM
Company Name: Double E Cabinets
Country: UNITED STATES
Location: Amarillo, TX

Re: Toe board and notch

Post by Kerry Fullington »

Jack,
In the Cabinet Editor/ Construction Settings, go to the Deck Tab
In the Deck Inset Settings-Bottom Inset. Use the formula - Bottom Rail Width - Deck Thickness
Post Reply