Progress bar glitch

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Forrest Chapman
eCabinets Beta Tester
Posts: 1230
Joined: Mon, May 30 2005, 2:26PM
Location: Anderson SC.
Contact:

Progress bar glitch

Postby Forrest Chapman » Wed, Mar 15 2023, 1:30PM

I just started experiencing this. When doing a rebuild or some type of function that displays a progress bar the box never closes. Just hangs up on the screen. Usually when I re gen or go back to another screen it will disappear but still an annoyance. I'm thinking it may be a new W10 update but even after doing the latest one today it's still an issue. I'm on the most recent build for my video card but it is already a couple years old so can't do anything about that.

Thanks, Forrest

Kerry Fullington
Wizard Member
Posts: 4718
Joined: Mon, May 09 2005, 7:33PM
Company Name: Double E Cabinets
Country: UNITED STATES
Location: Amarillo, TX

Re: Progress bar glitch

Postby Kerry Fullington » Thu, Mar 16 2023, 11:42AM

Forrest,

I used to have that all the time. Very annoying. A new computer fixed it for me. :D

Donald Thomson
Guru Member
Posts: 833
Joined: Thu, May 14 2009, 11:41PM
Company Name: Diamond Lake Custom Woodworks
Location: Newport, WA
Contact:

Re: Progress bar glitch

Postby Donald Thomson » Thu, Mar 16 2023, 12:12PM

I get that regularly too. I don't think I'm ready to take the step Kerry did and get a new computer to make it go away. :shock: Obviously a bug in eCabs software somewhere. I'll let them fix it... :lol:
Sincerely,

Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com

Forrest Chapman
eCabinets Beta Tester
Posts: 1230
Joined: Mon, May 30 2005, 2:26PM
Location: Anderson SC.
Contact:

Re: Progress bar glitch

Postby Forrest Chapman » Thu, Mar 16 2023, 12:51PM

Kerry,

My newer laptop doesn't do it so I'm sure a new desktop would fix it but its still a very capable setup so kinda hard to justify replacing at this point. I think it's graphics card related but maybe something Thermwood can look at and adjust.

Forrest

Clint Buechlein
Thermwood Team
Posts: 693
Joined: Fri, May 15 2015, 1:21PM
Company Name: Thermwood Corp
Country: UNITED STATES

Re: Progress bar glitch

Postby Clint Buechlein » Fri, Mar 17 2023, 9:32AM

If we could get it to happen more than once every 6-8 months we would at least have a chance to figure out what the issue is. But, if you can get a cabinet that does it every time and the steps or changes you are making that leaves the dialog hanging, we can at least try here on various computers to try to reproduce it.

-Clint-

Donald Thomson
Guru Member
Posts: 833
Joined: Thu, May 14 2009, 11:41PM
Company Name: Diamond Lake Custom Woodworks
Location: Newport, WA
Contact:

Re: Progress bar glitch

Postby Donald Thomson » Fri, Mar 17 2023, 11:35AM

Those intermittent issues are a real pain to find. I understand. It certainly doesn't stop a user from working. I normally just move the dialog off the bottom of the screen out of the way and keep going.
Sincerely,

Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com

Clint Buechlein
Thermwood Team
Posts: 693
Joined: Fri, May 15 2015, 1:21PM
Company Name: Thermwood Corp
Country: UNITED STATES

Re: Progress bar glitch

Postby Clint Buechlein » Mon, Mar 20 2023, 7:11AM

Donald Thomson wrote:Those intermittent issues are a real pain to find. I understand. It certainly doesn't stop a user from working. I normally just move the dialog off the bottom of the screen out of the way and keep going.
Long as the dialog is selected you can press escape and it will go away.

-Clint-

Donald Thomson
Guru Member
Posts: 833
Joined: Thu, May 14 2009, 11:41PM
Company Name: Diamond Lake Custom Woodworks
Location: Newport, WA
Contact:

Re: Progress bar glitch

Postby Donald Thomson » Mon, Mar 20 2023, 11:43AM

Thanks Clint :D
Sincerely,

Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com


Return to “eCabinet Systems Software”

Who is online

Users browsing this forum: Ahrefs [Bot], Bing [Bot] and 8 guests