dxf files export

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

justin mason
Junior Member
Posts: 43
Joined: Fri, Jan 20 2006, 11:31PM
Company Name: IWS
Country: UNITED STATES
Location: Redmond, wa 98052

dxf files export

Postby justin mason » Fri, Mar 02 2007, 5:26PM

I am working with an architect now, and he mentioned it would be great if I would send him the dxf file so he can build the house around the kitchen.
He uses chief architect pro
I searched the forum for dxf and seemed to find out how to IMPORT but I don't know how to export,
do I zip, or can I save as _____dxf
I have never tried anything like this.
please help, thank you very much
clear design

DanEpps
Wizard Member
Posts: 5852
Joined: Thu, Jul 28 2005, 10:18AM
Company Name: Dan Epps
Country: UNITED STATES
Location: Rocky Face GA

Postby DanEpps » Fri, Mar 02 2007, 5:30PM

You can only import dxf files to eCabinets. There is no option to produce a file that is compatible with any other program or CNC machine.

justin mason
Junior Member
Posts: 43
Joined: Fri, Jan 20 2006, 11:31PM
Company Name: IWS
Country: UNITED STATES
Location: Redmond, wa 98052

Postby justin mason » Fri, Mar 02 2007, 5:34PM

so I am unable to save as and export dxf files of a job, or 3d images he can copy and paste in his program.
I noticed in the file tab there is an export section, but it is greyed out.


thank you dan
clear design

justin mason
Junior Member
Posts: 43
Joined: Fri, Jan 20 2006, 11:31PM
Company Name: IWS
Country: UNITED STATES
Location: Redmond, wa 98052

Postby justin mason » Fri, Mar 02 2007, 5:35PM

what else can I do?
clear design

DanEpps
Wizard Member
Posts: 5852
Joined: Thu, Jul 28 2005, 10:18AM
Company Name: Dan Epps
Country: UNITED STATES
Location: Rocky Face GA

Postby DanEpps » Fri, Mar 02 2007, 5:58PM

Well, the architect needs to design the house first! Building a house around cabinets is like building the roof, then the walls and floors before digging the foundation.

Kerry Fullington
Wizard Member
Posts: 4718
Joined: Mon, May 09 2005, 7:33PM
Company Name: Double E Cabinets
Country: UNITED STATES
Location: Amarillo, TX

Postby Kerry Fullington » Fri, Mar 02 2007, 6:19PM

Justin,
You can send dimensioned line drawings of the layout and wall elevations for the architect to use to create his drawings but there is no easy way for him to simply copy and past the drawings.
Kerry

Peter Walsh
Guru Member
Posts: 460
Joined: Thu, May 19 2005, 3:15PM
Location: Palm Springs, Ca
Contact:

Postby Peter Walsh » Fri, Mar 02 2007, 6:31PM

Justin,
Take the room into the drawing editor and dimension everything (you may want to use more than one view). Print those out, or save to a file; then, send him some jpgs of the presentation images of the kitchen from views which match the dimensioned drawings.
He should be able to survive very nicely from that info since that is pretty much all he has to work with from many other suppliers.
He may be trying to avoid some design work.
regards,

justin mason
Junior Member
Posts: 43
Joined: Fri, Jan 20 2006, 11:31PM
Company Name: IWS
Country: UNITED STATES
Location: Redmond, wa 98052

Postby justin mason » Fri, Mar 02 2007, 8:00PM

can we export dxf in the future?
that would be awsome.
by the way he is not literally building the kitchen first. I have been doing good with the line drawings, I just want to share file from programs to ease the both of us. I could use the cheif architect program myself and forget ecab until I nail down the layout, then ecab it. but thats..........
mabey some day we can share. :D
clear design

Kerry Fullington
Wizard Member
Posts: 4718
Joined: Mon, May 09 2005, 7:33PM
Company Name: Double E Cabinets
Country: UNITED STATES
Location: Amarillo, TX

Postby Kerry Fullington » Sat, Mar 03 2007, 9:10AM

Justin,
I hate to speak for Thermwood but I doubt there will ever be .dxf exports from eCabinets because this would allow owners of other machines the ability to cut parts using this free software.
Kerry

DanEpps
Wizard Member
Posts: 5852
Joined: Thu, Jul 28 2005, 10:18AM
Company Name: Dan Epps
Country: UNITED STATES
Location: Rocky Face GA

Re:

Postby DanEpps » Sat, Mar 03 2007, 9:15AM

Kerry Fullington wrote:Justin,
I hate to speak for Thermwood but I doubt there will ever be .dxf exports from eCabinets because this would allow owners of other machines the ability to cut parts using this free software.
Kerry
Actually Kerry, you don't have to speak for Thermwood--they have already said that before in the forum. In fact, I believe Ken Susnjara is the one who said that in one thread.

justin mason
Junior Member
Posts: 43
Joined: Fri, Jan 20 2006, 11:31PM
Company Name: IWS
Country: UNITED STATES
Location: Redmond, wa 98052

Postby justin mason » Sat, Mar 03 2007, 4:49PM

thank you guys for the replies on my question. that is a good point about not making dxf files.
that is ok,
the program is great in so many different aspecs, like the software, and this forum, the professional advise ,etc.....
thank you again to the ecab folks who care.

JM
clear design

Ron Russell
New Member
Posts: 1
Joined: Fri, Jun 11 2021, 9:33AM
Company Name: RC Russell Designs
Country: UNITED STATES

Re: dxf files export

Postby Ron Russell » Wed, Nov 09 2022, 9:07AM

Dan Epps,
Your comment on not designing the house around the kitchen can be easily debated against. Let's start with Form Follows Function. You design the space to fit the clients needs, right? How many times have you heard of someone adding onto the house to enlarge a kitchen? How many times you or your client said, I wish this kitchen was shaped differently, so we could use ________(fill in the blank) in the kitchen?

Mark McCallum
Guru Member
Posts: 507
Joined: Thu, Jun 16 2005, 7:53PM
Location: Sydney Aust

Re: dxf files export

Postby Mark McCallum » Mon, Nov 14 2022, 4:49AM

Hi Ron.
Welcome to the forum.
I'm not sure if Dan frequents the forum any more.
This thread is, (dare I say it) 15 years old.
Mark


Return to “eCabinet Systems Software”

Who is online

Users browsing this forum: Ahrefs [Bot], Bing [Bot], Semrush [Bot] and 14 guests