Error 25 Could not start Thermwood interface

Discuss Thermwood 5-axis Machinery, Controller, and Software.

Moderators: Jason Susnjara, Clint Buechlein, Jim Bullis

Post Reply
Carlos Marin
New Member
Posts: 1
Joined: Mon, Feb 07 2011, 9:14AM
Company Name: Specialty manufacturing Inc

Error 25 Could not start Thermwood interface

Post by Carlos Marin »

We started getting this error this morning, is there a fix for it?


Thanks !
Ryan Hochgesang

Re: Error 25 Could not start Thermwood interface

Post by Ryan Hochgesang »

Carlos,

I will need more information about your machine to understand what is going on. Please email additiuonal info to: program@thermwood.com

- Machine number ( located on serial tag back of base )
- Your company name and information

So that I can pull the file on this machine and look in greater detail.
Mitchel Kagawa
New Member
Posts: 1
Joined: Fri, Apr 23 2010, 7:00AM
Company Name: Navatek Ltd.

Re: Error 25 Could not start Thermwood interface

Post by Mitchel Kagawa »

Ryan, I'm getting the same error. It just hangs at the Thermwood splash screen then kicks to the error message after 5 minutes. Were you guys able to come up with a resolution? ~MK
Ryan Hochgesang

Re: Error 25 Could not start Thermwood interface

Post by Ryan Hochgesang »

This error is typically due to an error in communication during power up. To resolve issue, you can reseat the profibus card.
Post Reply