• Axis 4or 5 Out limit, Air Pressure Low, VSD Fault

Discuss Thermwood 5-axis Machinery, Controller, and Software.

Moderators: Jason Susnjara, Clint Buechlein, Jim Bullis

Post Reply
Gorka Maidagan
New Member
Posts: 3
Joined: Wed, Nov 30 2011, 5:31PM
Company Name: Seeley International
Country: AUSTRALIA
Location: 112 O'sullivan Beach Rd Lonsdale SA 5160
Contact:

• Axis 4or 5 Out limit, Air Pressure Low, VSD Fault

Post by Gorka Maidagan »

Hi Forum Members an admins,
We have the C67S343, 5 axis.
I was trying to fix the "“” ERROR 1500 Internal Error, Report to Thermwood ””, so I investigate in the forum and I foun the Procedure to fix it (haven't finished yet), but then It came with anothe Error wich i can find in the forum and am asking for help:

• Axis 4or 5 Out limit, Air Pressure Low, VSD Fault

see the atached document below

kind regards
Gorka.
router issues.doc
Some pics and coments, forget about the damage part
(1.63 MiB) Downloaded 1341 times
Gorka Maidagan
New Member
Posts: 3
Joined: Wed, Nov 30 2011, 5:31PM
Company Name: Seeley International
Country: AUSTRALIA
Location: 112 O'sullivan Beach Rd Lonsdale SA 5160
Contact:

Re: • Axis 4or 5 Out limit, Air Pressure Low, VSD Fault

Post by Gorka Maidagan »

Hi All, and special thanks to thermwood, everything is fine and running.....
Post Reply