Parasolid Error creating the new part body

Off-topic discussion that doesn't pertain to the other forums.

Moderator: Jason Susnjara

Post Reply
Nicholas Kiss
Junior Member
Posts: 31
Joined: Wed, Nov 22 2017, 2:09PM
Company Name: Clearcut
Country: CANADA

Parasolid Error creating the new part body

Post by Nicholas Kiss »

The error message i get is "cannot apply the selected changes: there was a parasolid error creating the new part body"

i got these after changing my cabinets right end top deck and left end from blind dado to butt and made it a phantom part so i had a reference point for my stretchers and i was able to make a batch of holes of maybe 100 and then i left to save and when i came back i had the error
i was able to make these holes
i was able to make these holes
no problem.PNG (11.7 KiB) Viewed 13377 times
i cant add any part editor cuts here at all
i cant add any part editor cuts here at all
This is what i made the red is what was made from blind dado to butt
This is what i made the red is what was made from blind dado to butt
please get back to me asap thank you so much
Post Reply