Offal cut-through depth

Discuss Thermwood 3-axis Machinery, Controller, and Software.

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Jim Bullis

Tommy Wieler
Senior Member
Posts: 124
Joined: Fri, Sep 22 2017, 7:49AM
Company Name: Silverpine Cabinets
Country: CANADA

Offal cut-through depth

Postby Tommy Wieler » Wed, Jun 29 2022, 8:04AM

Any reason the offal outline cuts deeper than the rest of the job? Cut through depth is set at .15mm, and all the parts obey that setting, except the offal, which cuts through at .45mm.
Attachments
ControlNest7-0-3-3.cab.zip
(1.55 MiB) Downloaded 141 times

Clint Buechlein
Thermwood Team
Posts: 693
Joined: Fri, May 15 2015, 1:21PM
Company Name: Thermwood Corp
Country: UNITED STATES

Re: Offal cut-through depth

Postby Clint Buechlein » Wed, Jun 29 2022, 2:19PM

Tommy,

Can you post your code? When I nest and write to CNC outline and off fall show same cut through depth.

-Clint-
Attachments
Code.JPG

Tommy Wieler
Senior Member
Posts: 124
Joined: Fri, Sep 22 2017, 7:49AM
Company Name: Silverpine Cabinets
Country: CANADA

Re: Offal cut-through depth

Postby Tommy Wieler » Thu, Jun 30 2022, 8:09AM

Capture.JPG

Clint Buechlein
Thermwood Team
Posts: 693
Joined: Fri, May 15 2015, 1:21PM
Company Name: Thermwood Corp
Country: UNITED STATES

Re: Offal cut-through depth

Postby Clint Buechlein » Thu, Jun 30 2022, 10:02AM

Tommy,

Your off fall that you used for material was made from a file where your 16mm material was entered as thicker than the new .twd. The off fall was created from a file with the 16mm material that was set to 16.3mm, the current .twd it was set to 16mm. It's a branch in the code between cutting parts and cutting off fall from the material that the next version of Control Nesting has addressed.

-Clint-

Tommy Wieler
Senior Member
Posts: 124
Joined: Fri, Sep 22 2017, 7:49AM
Company Name: Silverpine Cabinets
Country: CANADA

Re: Offal cut-through depth

Postby Tommy Wieler » Thu, Jun 30 2022, 11:11AM

Makes sense, thanks Clint.


Return to “Thermwood 3-Axis Machinery”

Who is online

Users browsing this forum: Ahrefs [Bot] and 4 guests