control nesting 7.06 Bug

Discuss Thermwood 3-axis Machinery, Controller, and Software.

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Jim Bullis

Post Reply
Thomas strembitsky
Guru Member
Posts: 292
Joined: Fri, Jul 27 2012, 12:30PM
Company Name: true form cabinets
Country: CANADA
Contact:

control nesting 7.06 Bug

Post by Thomas strembitsky »

this one is interesting.

Load a job and add an off fall manually rectangular with a size that the parts will nest on to.
nest and look at the layout. then write to cnc and the parts on the sheet image are inflated. but if you check the cut paths they are correct.
before.PNG
after.PNG
code output is correct.PNG
code output is correct.PNG (9.08 KiB) Viewed 2492 times
Intel(R) Core(TM) i5-6400 @ 2.70GHz 8.00 GB RAM
NVIDIA GeForce GTX 950
Windows 10 Professional 64-bit
http://www.trueform.ca
CS43 cnc
Tommy Wieler
Senior Member
Posts: 124
Joined: Fri, Sep 22 2017, 7:49AM
Company Name: Silverpine Cabinets
Country: CANADA

Re: control nesting 7.06 Bug

Post by Tommy Wieler »

Seeing the same thing here.
Larry Epplin
Thermwood Team
Posts: 668
Joined: Tue, May 17 2005, 12:44PM
Location: Thermwood

Re: control nesting 7.06 Bug

Post by Larry Epplin »

We will get this resolved. Thanks for letting us know!
Post Reply