Attn Guru's (Kerry)

John Lawrence · Post by **John Lawrence** » Mon, Mar 19 2007, 7:52AM

Can anyone please tell me why the wall with the cabinets on it is coming out dark when the wall to the right and the floor are beaming????

Mike Seisser · Post by **Mike Seisser** » Mon, Mar 19 2007, 8:12AM

John,

I would check the Shine settings for the washed out floor and wall, as well as the Shine setting for the dark wall.

Mike

John Lawrence · Post by **John Lawrence** » Mon, Mar 19 2007, 8:40AM

Mike, i have done all the usual checks - shine for both walls are set the same, i have played with light intensity and all to no avail.

Kerry Fullington · Post by **Kerry Fullington** » Mon, Mar 19 2007, 8:52AM

John,
It is because of the light cans inside the cabinets. They create a shadow on the cabinet wall and reflect on the other wall creating the wash out. Below is how I would light this. Less is more in lighting.

John Lawrence · Post by **John Lawrence** » Mon, Mar 19 2007, 8:58AM

Thanks kerry,
That is how i would normaly light it but i really wanted to show what it would look like with down lights shining down the front of the doors and from under neath the overheads. Guess you cant have everything.

Kerry Fullington · Post by **Kerry Fullington** » Mon, Mar 19 2007, 9:19AM

John,
Remove the washed out wall, move your overhead lights back and up the intensity a bit. Set all the light cans to 10%.
Kerry

John Lawrence · Post by **John Lawrence** » Tue, Mar 20 2007, 3:36AM

You are the man Kerry, so glad there so many helpfull people on this forum.

Thankyou!!!

Thermwood / eCabinet Systems

Attn Guru's (Kerry)

Attn Guru's (Kerry)