How would I make ceiling lighter

George Davidson · Post by **George Davidson** » Tue, Apr 17 2007, 4:41PM

I need to make the drop ceiling brighter

Going to get a new graphics card and bring memory up to 2GB
tonight.

Michael Yeargain · Post by **Michael Yeargain** » Tue, Apr 17 2007, 5:06PM

You have too much time on your hands George.

I can't help with this one.

How did you create the panels and rails?

I haven't tried it but...

A display panel with the shine cranked up and placed on the floor. Then before presentation mode associate the panel to a small wall and hide the wall and associates. Hopefully this will reflect the light upwards.

George Davidson · Post by **George Davidson** » Tue, Apr 17 2007, 5:40PM

Hi Michael
I make them in my other program and use it in that program to show my
customer it in there new home that I design for the customers.
Tis ceiling is 12' x 12'
Tile 2'x 2' x1/2\"
Tracks 1\" x 1 1/4\" x 12',4',2' long

Kerry Fullington · Post by **Kerry Fullington** » Tue, Apr 17 2007, 6:10PM

George,
Try your ceiling without the can lights and place a chandelier close to the floor to light the ceiling. The can lights focus light down and everything above them is calculated as shadow.
Give it a try.
Kerry

George Davidson · Post by **George Davidson** » Tue, Apr 17 2007, 7:21PM

That was it Thank You Kerry

Thermwood / eCabinet Systems

How would I make ceiling lighter

How would I make ceiling lighter