hole patterns

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal, Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Post Reply
Nemanja Vujkovic
Senior Member
Posts: 222
Joined: Wed, Feb 21 2007, 1:29PM
Location: STL, MO

hole patterns

Post by Nemanja Vujkovic »

Does anyone have problem with hole patterns, or is it just me?
They never seem to work perfectly. They are either not deep enough, or they are just slightly misplaced.
This goes for hinge and slide patterns!
Top
Justin Melhiser

Post by Justin Melhiser »

Nemanja
Is this showing up in the software or at the machine? If its the software please send me your cabinet to cabinets@thermwood.com.
Top
User avatar
Brian Shannon
eCabinets Beta Tester
Posts: 979
Joined: Thu, May 19 2005, 10:50PM
Location: Los Alamos, CA

Post by Brian Shannon »

Some of the \"supplied\" hole patterns are NOT deep enough. You may have to change them then save the new pattern. Also, if your partition/end is not flush with the faceframe, the holes will not be deep enough as the depth starts at the edge of the faceframe openning.


Brian
Top
Post Reply

Return to “eCabinet Systems Software”