Placing Cabinets

Gregory Hairston · Post by **Gregory Hairston** » Tue, Oct 02 2007, 8:40AM

I cant seem to find this through search. Is there an easy way to place cabinets (face frame) and have the cabinets snap to the adjoining cabinet and wall

Greg

Damon Nabors · Post by **Damon Nabors** » Tue, Oct 02 2007, 10:23AM

Greg,

when you are in the detail room area, right click and choose INSERT ITEM METHOD, click align to back. You should be able to bring the cabinet in and slide it right into place. If it is in FREE STYLE it will not snap into place. Sometimes you will have to adjust it or tweek it just a little. You can dbl click the cabinet that is out of place and dbl click the cabinet next to it and it should tell you in red letters the distance between them if there is a gap. If there is, just dbl click the cab you want to move (should turn green) and RT Click, then choose edit move increment, then type in how much you want to move the cab. Then hold down control key and arrow which direction you want to go. You may need to put it in free style to do this.

Hope this helped.

Damon

Damon Nabors · Post by **Damon Nabors** » Tue, Oct 02 2007, 10:27AM

Greg, I told you wrong. Hit the shift key and then arrow, not the control key.

Damon