Peninsula Cabinet

[Mark Terreau]

Hello,

I am trying to design a peninsula cabinet with a face frame and doors on the back of the cabinet as well as on the front. Can anyone tell me how to do this?

Thank you.

[Glenn Van Reason]

Ok one method to do this is.
1) Start with a standard base cabinet of the dimensions you require.
2) Remove the back of the cabinet.
3) Load another cabinet of same dimensions.
4) Remove all cabinet parts except for faceframe and doors.
5) Rotate and align to back of existing cabinet.
6) Save as an assembly.

[Mark Terreau]

Okay, thank you, that would work. I would just have to make sure that the back that's originally placed on the cabinet is 3/4" thick or the resulting depth of the cabinet would be off.

[Glenn Van Reason]

The depth of your first cabinet should be what you want to end up with less your rear faceframe. eCabinets will adjust the sides to be the depth of the cabinet automatically when you delete the back.

[Mark Terreau]

Ahhhh, gotcha.

Where do you get those recycled electrons? Do you have a dust collector hood hooked up to your monitor?

[Glenn Van Reason]

I recycle them from all the spam I get. lol