IWF 2008

Damon Nabors · Post by **Damon Nabors** » Sun, Aug 03 2008, 6:02PM

Who is going this year?

DanEpps · Post by **DanEpps** » Sun, Aug 03 2008, 6:22PM

I doubt that I will get to go. I really hate not getting to see everyone too.

Damon Nabors · Post by **Damon Nabors** » Sun, Aug 03 2008, 7:14PM

Dan, get a nerve block and a stretcher and you'll be fine. Or better yet, Mike said he was willing to fix you up on the CNC.

Neville Bastian · Post by **Neville Bastian** » Sun, Aug 03 2008, 7:24PM

What, Dan the man not going to be there....
Travelling half way around the world to meet the legend..
What a disappointment.

No worries Dan. Look after your health first. These fairs are fairly energy draining.
Maybe Jason can set you up with a recliner chair and you can look after Ecabinet enquires?

Regards

Neville

DanEpps · Post by **DanEpps** » Mon, Aug 04 2008, 5:51AM

You guys are making me laugh again...and it hurts.

DanEpps · Post by **DanEpps** » Mon, Aug 04 2008, 6:00AM

To make matters worse, today is employee-guest day at the country club my son works at. He has been looking forward to taking me golfing there ever since he's been working there. I'm going, even if it means just riding in the cart (anyone that has ever seen me play golf knows that its better if I just stay in the cart anyway

).

Damon Nabors · Post by **Damon Nabors** » Mon, Aug 04 2008, 7:13AM

Yeah, Golfing is one of those sports that you almost have to play every day in order to stay on top of your game. I used to play regularly but I was never any good. My wife likes bowling. I always said if I could trade my golf score with my bowling score, I would be alright.

Be careful if you decide to play. Tiger Woods is out for the season because he decided to play on a bad knee. It is not worth further injuring yourself. I would just stay close to the Beer Cart, after a few, the pain will ease up.

DanEpps · Post by **DanEpps** » Mon, Aug 04 2008, 11:45AM

Well, I actually played (or pretended to play) a couple of holes. It was worth it just for the ride around the course. It is a very beautiful course, set at the base of a mountain and utilizing the natural lay of the land.

Now I'm back home and it is about time to hit the recliner for a while.

Jeremy Schiffer · Post by **Jeremy Schiffer** » Mon, Aug 04 2008, 9:42PM

I'll be there. I was planning on spending the whole show at the Thermwood booth looking at the machines, deciding which one I want. But, I jumped the gun and just bought one (due to arrive later this month, I'm excited!)... so, I guess I'll spend the whole show a the Thermwood booth looking at the machines.

Damon Nabors · Post by **Damon Nabors** » Tue, Aug 05 2008, 6:53AM

DanEpps · Post by **DanEpps** » Tue, Aug 05 2008, 7:27AM

Congrats on the new "baby" Jeremy!!! Has Windstream gotten around to extending DSL out your way yet? If not, its too bad. You have a 21st century cabinet shop with 18th internet.

Jeremy Schiffer · Post by **Jeremy Schiffer** » Tue, Aug 05 2008, 4:20PM

Thanks! Yeah, I'm using relatively high-speed internet now, but no thanks to Windstream! This is one of those portable USB modems that works with cell phone towers (Verizon in this case), and compared to the ol' string and cans, it's blazing fast! I'm lovin' it. Well, at $60 a month for a 5GB limit it ain't perfect, but it is usable, where the dialup just plain wasn't useable. So I called Windstream and told them to take a hike, both with the dialup internet AND the home phone service, which was costing about $70 a month... so it works out pretty well I think.

Here's to a speedy recovery Dan, hope to see you at IWF!

Of course, I'm looking forward to meeting many other eCabbers at the show. Won't be much for me to look at otherwise since I've blown my budget!

Neal Reeves · Post by **Neal Reeves** » Tue, Aug 05 2008, 10:36PM

I'm going. You guys don't know me, but I am looking forward to meeting all of you. I will probably spend most of my time at the Thermwood booth looking at the machines. I hope to get one soon. I have had ecabinets for a long time, I just haven't taken the time to fully learn the program yet. I work with it in my spare time which isn't very often. I am getting close to allowing some of it to sink in. I am excited about seeing a machine cut a cabinet. I hope that you wizards and seniors will allow me to get in on the fun. See y'all at the show!!!!!
WE'RE GOING TO THE FAIR!!!!

Neville Bastian · Post by **Neville Bastian** » Tue, Aug 05 2008, 11:11PM

It seem like its going to be a bit hit and miss meeting up with each other. Why don't we all try and meet at say noon and 4pm each day. That way who ever is around should catch up with a few forum users.
What would be really neat is if a senior programmer could give the users a foretaste of what the next version of Ecabinets has. Maybe there is a small meeting room we could use for a hour or so.
This would be good PR and make us feel part of the Thermwood family.
Just a thought Justin.

Regards

Neville

Rick Palechuk · Post by **Rick Palechuk** » Tue, Aug 05 2008, 11:34PM

Congrats on the new machine Jeremy.

Thermwood / eCabinet Systems

IWF 2008

IWF 2008

Re: IWF 2008

Re: IWF 2008

Re: IWF 2008

Re: IWF 2008

Re: IWF 2008

Re: IWF 2008

Re: IWF 2008

Re: IWF 2008

Re: IWF 2008

Re: IWF 2008

Re: IWF 2008

Re: IWF 2008

Re: IWF 2008

Re: IWF 2008