Door location problem

Adam DAgosto · Post by **Adam DAgosto** » Mon, Apr 13 2009, 8:17PM

Hello.

I have attached a cabinet for you to look at with a door location problem.

It's kinda weird, but what I have here is a cabinet that is sharing the face frame from the cabinet to the left (not shown). So the cabinet on the left has bigger face frames to overlap into the next cabinet so there are no joint lines visible.

Anyway, this face frame issue is causing my door to be placed in the wrong location.

Does anyone know how to fix this problem? What I need is for the left edge of the door to OVERHANG the edge of where the face frame ends by 5/8".

If you can follow all this without looking at the cabinet, you're brilliant!

Otherwise, please look at the attached cabinet for a look and let me know what you think.

Thanks,

Adam

Leo Graywacz · Post by **Leo Graywacz** » Mon, Apr 13 2009, 8:37PM

Use -7/16" for the left overlap.

Adam DAgosto · Post by **Adam DAgosto** » Mon, Apr 13 2009, 9:52PM

PREFECT!

Leo's the MAN!!!

Thermwood / eCabinet Systems

Door location problem

Door location problem

Re: Door location problem

Re: Door location problem