Hi All,
I'm Using ProE Software to create cutting paths in our Thermwood 91 000 5 axis C67S-343 Version N 5.05, everything is good when creating 3 axis cutting paths, but when 5 axis cutting path are required , the program doesn't follow the required path , from the software company they are gettin back to me saying if there is any way the machine can be offseted from the controller, but I'm not sure about that.
Can anyone suggest something
XYZ C B offset
Moderators: Mike Iubelt, Jason Susnjara, Clint Buechlein, Mike Iubelt, Jason Susnjara, Clint Buechlein
-
Gorka Maidagan
- New Member
- Posts: 3
- Joined: Wed, Nov 30 2011, 5:31PM
- Company Name: Seeley International
- Country: AUSTRALIA
- Location: 112 O'sullivan Beach Rd Lonsdale SA 5160
- Contact:
-
Brad McIntosh
- Guru Member
- Posts: 539
- Joined: Wed, May 18 2005, 6:59PM
- Company Name: CNC Automation
- Country: CANADA
- Location: St. Zotique, Québec, Canada
- Contact:
Re: XYZ C B offset
Gorka,
Can you take a sample 5 axis program, ZIP it up and upload it here? Some one may be able to then tell you what might be missing and explain how to go about "syncing" the program origin to a part or fixture reference on the machine.
Can you take a sample 5 axis program, ZIP it up and upload it here? Some one may be able to then tell you what might be missing and explain how to go about "syncing" the program origin to a part or fixture reference on the machine.