hey All,
I have some cabinets that are using inset doors, the customer would like for the 3/4" deck to be 1/4" above the 2" bottom rail so the door will have a stop. I thought it would be a simple change to the decks bottom inset of 1.25" to 1.5" but that does not work. Any Ideas?
AAAAAAAAAAAAGH! NVER MIND "DECK FLOAT" DUHHHHH!
Thanks,
Chris
raise the deck
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal, Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
Chris B Campbell
- Senior Member
- Posts: 114
- Joined: Fri, Jul 29 2005, 4:00PM
- Location: Helendale, CA.
-
Leo Graywacz
- Guru Member
- Posts: 641
- Joined: Tue, Jan 16 2007, 7:56PM
- Company Name: LRG WoodCrafting
- Location: Windsor Locks, CT
- Contact:
Re: raise the deck
Yes, deck float set to -.25"
Dell Precision 7710
Intel Core i7-6820HQ @ 2.70GHz 16.00 GB RAM
NVIDIA Quadro M3000M
512 GB PCIe NVMe - M.2 SSD
Win 7 Pro 64-bit
http://lrgwood.com
Intel Core i7-6820HQ @ 2.70GHz 16.00 GB RAM
NVIDIA Quadro M3000M
512 GB PCIe NVMe - M.2 SSD
Win 7 Pro 64-bit
http://lrgwood.com
