...and there is NONE on double-pass parts anymore! With CN 5.79, the new "climb 1st pass, conventional 2nd pass" feature for double pass parts has completely eliminated that annoying little lip that was always left. Now, the small parts have just as nice an edge as the large ones. Awesome.
And the single-pass dado is a nice surprise too... MUCH faster.
Kudos to Thermwood!
Don't gimme any lip!
Moderator: Jason Susnjara
-
- eCabinets Beta Tester
- Posts: 1119
- Joined: Tue, May 10 2005, 9:36PM
- Company Name: Corlane Custom Cabinetry LLC
- Country: UNITED STATES
- Location: Carnesville, GA
- Contact:
Don't gimme any lip!
http://www.corlanecabinetry.com
Intel Core i7-5820 3.3GHz, 16GB RAM, NVidia Quadro K2200 4GB, Windows 8.1 Pro 64 bit
CS-41 4x8
CS-45 5x12
Intel Core i7-5820 3.3GHz, 16GB RAM, NVidia Quadro K2200 4GB, Windows 8.1 Pro 64 bit
CS-41 4x8
CS-45 5x12
-
- New Member
- Posts: 12
- Joined: Fri, Oct 15 2010, 9:05AM
- Company Name: Rylex Closet Systems
Re: Don't gimme any lip!
Finally got to install CN5.79, and love the new double cut feature! In my book this is the best improvement since combining flip ops. No more recutting drawer parts that moved or sanding off the "lip" on small parts. Thanks Thermwood!