HELP!!
I have a CS45 and I am having an issue with splintering when I am cutting dados with .25" compression cutter in .5" prefinished maple plywood. I currently have it running at the feed and speed that the machine was set up with when the thermwood tech came out and installed our machine, which is 19,000 rpm and 700ipm. now I am confident that this is a plywood quality issue, as it is not consistent. NOTE this is using a brand new cutter, so I know it is not dull. can anyone give me an idea or 2? please and thank you.
splintering plywood
Moderators: Mike Iubelt, Jason Susnjara, Larry Epplin, Clint Buechlein, Mike Iubelt, Jason Susnjara, Larry Epplin, Clint Buechlein
-
john jurkowski
- New Member
- Posts: 8
- Joined: Tue, Sep 15 2015, 9:43AM
- Company Name: mcmanus development
- Country: UNITED STATES
-
tim lucas
- Guru Member
- Posts: 322
- Joined: Thu, Nov 29 2007, 5:18PM
- Company Name: Tim Lucas Custom Woodworks LLC
- Country: UNITED STATES
- Location: bell, florida
- Contact:
Re: splintering plywood
are you cutting deep enough to get below the upcut part of the cutter?
Tim Lucas Custom Woodworks LLC
www.TLCW.us
www.TLCW.us
-
Will Williamson
- Guru Member
- Posts: 454
- Joined: Thu, Dec 08 2005, 6:10PM
- Company Name: Williamson Finewoodwork
- Country: UNITED STATES
- Location: Capac MI
- Contact:
Re: splintering plywood
Try a .25 down spiral .
Will
http://www.willmade.com
KEG/Intel Core i 7 CPU K875 @ 2.93 GHZ/12G Ram
Dual boot XP PRO/Windows 7 Nvidia Quatro 600 1Gig Ram
http://www.willmade.com
KEG/Intel Core i 7 CPU K875 @ 2.93 GHZ/12G Ram
Dual boot XP PRO/Windows 7 Nvidia Quatro 600 1Gig Ram
-
john jurkowski
- New Member
- Posts: 8
- Joined: Tue, Sep 15 2015, 9:43AM
- Company Name: mcmanus development
- Country: UNITED STATES
Re: splintering plywood
yes, I am going down .26" and the up cut flutes are only .18"
I may try a full down spiral em and see how that works for me, thank you
I may try a full down spiral em and see how that works for me, thank you
