I'm trying to program predrill holes for left and right end assisting the dado and part editor takes so long is there any option of doing it faster? i need 3/16 holes
Thank You,
Nicholas Kiss
Predrill for dado
Moderator: Jason Susnjara
-
Nicholas Kiss
- Junior Member
- Posts: 31
- Joined: Wed, Nov 22 2017, 2:09PM
- Company Name: Clearcut
- Country: CANADA
-
Clint Buechlein
- Thermwood Team
- Posts: 719
- Joined: Fri, May 15 2015, 1:21PM
- Company Name: Thermwood Corp
- Country: UNITED STATES
Re: Predrill for dado
Nicholas,
Do you want the screw holes to interrupt the dado, or just want them in addition to the dado?
-Clint-
Do you want the screw holes to interrupt the dado, or just want them in addition to the dado?
-Clint-
-
Nicholas Kiss
- Junior Member
- Posts: 31
- Joined: Wed, Nov 22 2017, 2:09PM
- Company Name: Clearcut
- Country: CANADA
Re: Predrill for dado
I would like it in addition because of the top stretchers it might be a better idea to interrupt it on a longer stretch such as the sides(?)
Thanks again,
~Nicholas
Thanks again,
~Nicholas
-
Clint Buechlein
- Thermwood Team
- Posts: 719
- Joined: Fri, May 15 2015, 1:21PM
- Company Name: Thermwood Corp
- Country: UNITED STATES
Re: Predrill for dado
Nicholas,
If you don't want it to interrupt the dado, it will have to be manually added in via Part Editor. If it can interrupt the dado you can make a custom KD pattern to make through drill holes and use the Lock Dado construction method.
-Clint-
If you don't want it to interrupt the dado, it will have to be manually added in via Part Editor. If it can interrupt the dado you can make a custom KD pattern to make through drill holes and use the Lock Dado construction method.
-Clint-