bug with adding fillet on drawers

[Thomas strembitsky]

We use blum legra boxes and we get the cnc for cut the groove on the sides for us.
Pick a cabinet with this type drawer box load it into the assembly editor and then take the drawer box bottom or back into the part editor and make a rectangular cut and then cut through using geometric shapes then add 2 fillets to the cut. it deletes the existing cuts on the side when you add the second fillet.

[Clint Buechlein]

Thomas,

Can you post a cabinet that has the drawer box installed in at already that I can take a look at? I spitballed something using standard stuff and didn't have an issue so I want to try to narrow more on what your design is like.

-Clint-

[Thomas strembitsky]

Hi clint
sorry for the long delay but here is a cabinet with that drawer in it. in my instructions you will want to switch to back view in the part editor to see the original cuts

3 bank legra C and C.hsf

(946.02 KiB) Downloaded 30 times

Legra Box.hsf

(170.02 KiB) Downloaded 40 times

[Mark McCallum]

Hi Thomas.
I added some champers and I see something strange happening to your drawer box as well.