30° Unit door issues

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal, Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Post Reply
leigh mills
Senior Member
Posts: 211
Joined: Wed, Jan 23 2008, 9:49AM
Location: England UK

30° Unit door issues

Post by leigh mills »

Hi,

Has anybody used 30° units before, currently having problems putting the doors on our 30° units. The 45° works fine, so I tried to adapt a 45° unit into a 30°.... Unsuccessful

Take a look at my attachment see if you can come up with any suggestions, the door needs to be at a 30° angle so basically run in line with the front toe.

Thanks,

Leigh
Attachments
0250 - Single Door 30° End Cupboard 455 - RH.hsf
(266.02 KiB) Downloaded 685 times
Top
Post Reply

Return to “eCabinet Systems Software”