Ramp in error

Discuss Thermwood 3-axis Machinery, Controller, and Software.

Moderators: Mike Iubelt, Jason Susnjara, Larry Epplin, Clint Buechlein, Mike Iubelt, Jason Susnjara, Larry Epplin, Clint Buechlein

Post Reply
David Giesbrecht
Junior Member
Posts: 89
Joined: Thu, Mar 03 2011, 10:40PM
Company Name: Silverpine Cabinets
Country: CANADA

Ramp in error

Post by David Giesbrecht »

I just updated control nesting to see if the error left but it is still doing it. For tool settings it only see to do it with climb out line and conventional clean up. Some times drawing the pcs using different part that has different grain sometimes helps but I think the biggest problem is that it is trying to ramp in on a tenon and not a part side. See attached pic. and attached G code.
Attachments
cncError.zip
(83.67 KiB) Downloaded 810 times
IMG_2401.JPG
David Giesbrecht
Inter(R) Core(TM) i7-7700CPU OC@ 4.8 GHz
8.00 GB DDR5 2133MHz
NVIDIA GeForce GTX 970 4GB
Z270x-Gaming 5 MOBO
1TB Samsung 960PRO SSD
Top
Post Reply

Return to “Thermwood 3-Axis Machinery”