Glass rendering dark
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Junior Member
- Posts: 53
- Joined: Wed, Jul 12 2006, 11:50AM
- Location: South Boston, VA
- Contact:
Glass rendering dark
Why does display objects representing glass show up so dark?
Note the wine glasses on the floor.
-KB
Note the wine glasses on the floor.
-KB
- Attachments
-
- Glass - Lighting test1.jpg (458.12 KiB) Viewed 11402 times
-
- Wizard Member
- Posts: 4723
- Joined: Mon, May 09 2005, 7:33PM
- Company Name: Double E Cabinets
- Country: UNITED STATES
- Location: Amarillo, TX
-
- Junior Member
- Posts: 53
- Joined: Wed, Jul 12 2006, 11:50AM
- Location: South Boston, VA
- Contact:
-
- Junior Member
- Posts: 53
- Joined: Wed, Jul 12 2006, 11:50AM
- Location: South Boston, VA
- Contact:
-
- Junior Member
- Posts: 53
- Joined: Wed, Jul 12 2006, 11:50AM
- Location: South Boston, VA
- Contact:
-
- Wizard Member
- Posts: 5852
- Joined: Thu, Jul 28 2005, 10:18AM
- Company Name: Dan Epps
- Country: UNITED STATES
- Location: Rocky Face GA
Here is the glass itself.
- Attachments
-
- wine glass.hsf
- (58.3 KiB) Downloaded 441 times
-
- wine glass.jpg (3.36 KiB) Viewed 11416 times
-
- Junior Member
- Posts: 53
- Joined: Wed, Jul 12 2006, 11:50AM
- Location: South Boston, VA
- Contact:
-
- Junior Member
- Posts: 37
- Joined: Tue, May 24 2005, 11:03AM
- Location: 190 Soller Heights Rd., Ghent, NY 12075
- Contact:
Arched Mullions, muntins
Keith,
Am working on a bar and am planning to fabricate or buy out arched mullion doors very similar to those shown in your rendering. I elected not to include thi in my fiorst rpesentaiton as I was unsure how to proceed.
You're doing this in the part editor and cutting out apnel or cube then applying a cope and stick profile to these or is there something in the door drawer editir I'm missing (I'm trying to do something like the 7 lite Conestoga Cathedral Arched Mullion)
Thx for any assist.
CPS
Am working on a bar and am planning to fabricate or buy out arched mullion doors very similar to those shown in your rendering. I elected not to include thi in my fiorst rpesentaiton as I was unsure how to proceed.
You're doing this in the part editor and cutting out apnel or cube then applying a cope and stick profile to these or is there something in the door drawer editir I'm missing (I'm trying to do something like the 7 lite Conestoga Cathedral Arched Mullion)
Thx for any assist.
CPS
CPS
-
- Junior Member
- Posts: 53
- Joined: Wed, Jul 12 2006, 11:50AM
- Location: South Boston, VA
- Contact:
Hey Christopher,
What you are seeing is a display object I created in a separate 3D modeling program and converted it to an .stl file that eCabs will open in the Display Part Editor. In the DPE I added a material and saved in as an .hsf file that i used in the Cabinet/Assembly editor. I was trying to represent a cammed glass insert in a cabinet door. Attached is the file of the camming if it will help.
-KB
What you are seeing is a display object I created in a separate 3D modeling program and converted it to an .stl file that eCabs will open in the Display Part Editor. In the DPE I added a material and saved in as an .hsf file that i used in the Cabinet/Assembly editor. I was trying to represent a cammed glass insert in a cabinet door. Attached is the file of the camming if it will help.
-KB
- Attachments
-
- camming.jpg (5.53 KiB) Viewed 11346 times
-
- Camming.zip
- (43.95 KiB) Downloaded 449 times
-
- Junior Member
- Posts: 37
- Joined: Tue, May 24 2005, 11:03AM
- Location: 190 Soller Heights Rd., Ghent, NY 12075
- Contact: