I am curious if any one have successfully integrated face frame puzzle joints into projects? I could see when edge banding is not an issue it may work great on some projects. I am just interested in some feed back on the pros & cons.
Thanks,
Nested face frames puzzle joints?
Moderators: Jason Susnjara, Clint Buechlein, Jason Susnjara, Clint Buechlein
-
Robert Williams
- Junior Member
- Posts: 25
- Joined: Tue, Jan 02 2007, 5:57PM
- Location: Georgia
-
Brian Shannon
- eCabinets Beta Tester
- Posts: 979
- Joined: Thu, May 19 2005, 10:50PM
- Location: Los Alamos, CA
It worked good. I just don't know what level of job I would ever use it on. I made this bed for my grandson. It has 3 drawers on each side and I used the sports ball knobs.The whole bed(MDF) was cut on the router(just to prove I could). Faceframes, Drawer Fronts, cab parts, Headboard and footboard with carvings, Metabox drawer bottoms and backs.
- Attachments
-
- James Bed.jpg (175.81 KiB) Viewed 9018 times
-
Mark Taylor
- Guru Member
- Posts: 309
- Joined: Sat, Feb 04 2006, 5:13PM
- Location: Hilton Head / Bluffton SC
We've used the puzzle joint face frames for some painted projects...basically we've used 18mm Baltic Birch so there are no voids and a nice straight product.
The inside of the frame has simply been sanded and painted - a few of the pieces have been edge banded on the outside, but assembled first.
Mark
The inside of the frame has simply been sanded and painted - a few of the pieces have been edge banded on the outside, but assembled first.
Mark
