Search found 132 matches

by Gerry A Brown
Sat, Feb 16 2013, 12:25PM
Forum: eCabinet Systems Software
Topic: Current tandembox best practice
Replies: 4
Views: 970

Re: Current tandembox best practice

Hi Scott, Thanks that was very helpful. We use a plant on gable on end cabinets & so need a full clearance on that side & a half clearance everywhere else. We are considering drilling in between those two dimensions on the drawer front. This works out to a .6 mm difference between the two. W...
by Gerry A Brown
Sat, Feb 16 2013, 9:32AM
Forum: eCabinet Systems Software
Topic: Current tandembox best practice
Replies: 4
Views: 970

Current tandembox best practice

Hi, Could someone please tell me what is the current best method of adding tandembox drawers to get the drilling pattern on the drawer fronts & carcase sides. Or point me to a thread that discusses the topic. I have tried the search function but most of what I find is old information & I don...
by Gerry A Brown
Mon, Nov 05 2012, 10:12AM
Forum: eCabinet Systems Software
Topic: Feature Requests
Replies: 40
Views: 9559

Re: Feature Requests

Hi Kerry, What you say makes sense in terms of not giving the voting to much sway for which requests are implemented but I think it would be a useful tool for any member who would like to check the list to see what has been requested and maybe if Thermwood has indicated a interest in implementing th...
by Gerry A Brown
Sun, Nov 04 2012, 3:02PM
Forum: eCabinet Systems Software
Topic: Feature Requests
Replies: 40
Views: 9559

Re: Feature Requests

Hi Kerry, I thought that was where the Drawer Dado feature came from. What i was trying to point out is if we had a list we could see what feature requests are addressed in a new build & which ones are new features not requested by members etc. If we could have the feature requests ranked by vot...
by Gerry A Brown
Sun, Nov 04 2012, 10:33AM
Forum: eCabinet Systems Software
Topic: Feature Requests
Replies: 40
Views: 9559

Re: Feature Requests

Hi, I think Daren's suggestion of a master list would come in very handy at a time like this after a new release. We could check off which feature requests were checked off the list. I guess the down side of a master list is we would see how many features have been on the list for a long time with n...
by Gerry A Brown
Thu, Sep 06 2012, 3:20PM
Forum: Thermwood 3-Axis Machinery
Topic: 91000 G2 Supercontrol Monitor
Replies: 7
Views: 1977

Re: 91000 G2 Supercontrol Monitor

I thought you could adapt DVI to VGA but not VGA to DVI?

Gerry
by Gerry A Brown
Thu, Sep 06 2012, 11:23AM
Forum: Thermwood 3-Axis Machinery
Topic: 91000 G2 Supercontrol Monitor
Replies: 7
Views: 1977

Re: 91000 G2 Supercontrol Monitor

Hi Josh,

I know what you mean about asking first. I have learned enough lessons the other way :roll:
You didn't try to squeeze one of those new 27" displays in there :joker:

Gerry
by Gerry A Brown
Thu, Sep 06 2012, 9:52AM
Forum: Thermwood 3-Axis Machinery
Topic: 91000 G2 Supercontrol Monitor
Replies: 7
Views: 1977

Re: 91000 G2 Supercontrol Monitor

Hi Josh, We are running a 2007 CS45 & our machine has only VGA outputs as I recall the last time I had the box open. If you open it up & look where the display connects to the video card you can see what type of ports are available. DVI is more common these days . Hear is a page with the con...
by Gerry A Brown
Tue, Jul 17 2012, 6:20PM
Forum: Thermwood 3-Axis Machinery
Topic: Z axis will not drop
Replies: 34
Views: 9084

Re: Z axis will not drop

Hi, M61L8 brings the pins up then M62L8 drops them. I guess the good part of working through my problem is I understand the G code a little better. Scott, I read in a thread that the graphing almost always errors out even on files the router will run so I just ran the file with my hand on the feed r...
by Gerry A Brown
Tue, Jul 17 2012, 1:51PM
Forum: Thermwood 3-Axis Machinery
Topic: Z axis will not drop
Replies: 34
Views: 9084

Re: Z axis will not drop

Good. Please post your findings so that others can benefit. Dennis Hi Dennis, About 6 posts up from yours I did post what the problem was. "The problem was between the screen & the chair :roll: I had assumed V Carve was referencing the tool location in the tool changer ( 1 to 6) instead of...
by Gerry A Brown
Tue, Jul 17 2012, 11:31AM
Forum: Thermwood 3-Axis Machinery
Topic: Z axis will not drop
Replies: 34
Views: 9084

Re: Z axis will not drop

Hi Dennis,

I think we have it all sorted out now.

Thanks,
Gerry
by Gerry A Brown
Mon, Jul 16 2012, 5:56PM
Forum: Thermwood 3-Axis Machinery
Topic: Z axis will not drop
Replies: 34
Views: 9084

Re: Z axis will not drop

Hi, Simon, our router came with a rotary attachment it is a lathe that is connected to the supercontrol Thermwood calls it a playback device. We have not used it yet. We bought our machine used & it came with it. Once we get the cabinets & other flat table work running smoothly we will sit d...
by Gerry A Brown
Mon, Jul 16 2012, 4:02PM
Forum: Thermwood 3-Axis Machinery
Topic: Z axis will not drop
Replies: 34
Views: 9084

Re: Z axis will not drop

Hi Daniel, The problem was between the screen & the chair :roll: I had assumed V Carve was referencing the tool location in the tool changer ( 1 to 6) instead of the actual tool number in the super control :wall: Then I had the tool I wanted to use in the #5 tool changer location but the machine...
by Gerry A Brown
Sun, Jul 15 2012, 4:15PM
Forum: Thermwood 3-Axis Machinery
Topic: Z axis will not drop
Replies: 34
Views: 9084

Re: Z axis will not drop

Hi Ray, I gave it a try & the result is the same Z axis at top of travel. It must be a setting on my router but I am dumbfounded why the files I run that are from profile modeler or CN run fine & these files will not :wall: Scott , I have the location issue sorted out now the router goes to ...
by Gerry A Brown
Sun, Jul 15 2012, 11:56AM
Forum: Thermwood 3-Axis Machinery
Topic: Z axis will not drop
Replies: 34
Views: 9084

Re: Z axis will not drop

Hi Daniel, Both tools were measured a number of times & come up within.001 each time & no Z offset in the fixture table. Something is strange for sure. I will try the G902 offset & see if that works better for me. I hope Vectric support can come up with a solution I am right out of ideas...

Go to advanced search