Search found 97 matches

by mohan kommineni
Mon, Apr 19 2010, 12:29AM
Forum: Thermwood 3-Axis Machinery
Topic: CN FREEZING in 5.57&5.56 ALSO(negative dim -507994920mm)
Replies: 7
Views: 1291

Re: CN FREEZING in 5.57&5.56 ALSO(negative dim -507994920mm)

i have attached the esj file in this post as the previous post was not allowing more than 3 attachments


pls some one go through it and suggest what is causing
thanks to one and all

mohan
by mohan kommineni
Mon, Apr 19 2010, 12:18AM
Forum: Thermwood 3-Axis Machinery
Topic: CN FREEZING in 5.57&5.56 ALSO(negative dim -507994920mm)
Replies: 7
Views: 1291

CN FREEZING in 5.57&5.56 ALSO(negative dim -507994920mm)

HI all we are facing a problem in cn5.57 & 5.56 after loading the job we can find the drawer box sides and front coming up with a very big negative dimension and causing system freeze but practically there are no left and right and front sides on this drawer box as we are using metal slides stan...
by mohan kommineni
Wed, Mar 10 2010, 6:04PM
Forum: Thermwood 3-Axis Machinery
Topic: ERROR ON CONTROL NESTING
Replies: 3
Views: 639

Re: ERROR ON CONTROL NESTING

thanks ryan but before i get ur message i have reinstalled the whole image of c:drive freshly as there was another issue of no disk sace on c:drive left with only 200mb due to windows updates adobe updates office updates internet explorer updates and antivirus is there any way to increase the partio...
by mohan kommineni
Tue, Mar 09 2010, 6:01PM
Forum: Thermwood 3-Axis Machinery
Topic: ERROR ON CONTROL NESTING
Replies: 3
Views: 639

ERROR ON CONTROL NESTING

hi all we are having a severe problem with control nesting once entering into control nesting the thermwood genration 2controller installer comes up and after a minute or so it gives me 2errors and it keeps repeating the same error messages no end. CN was working fine after i have upgraded to 5.53 t...
by mohan kommineni
Tue, Mar 02 2010, 10:21PM
Forum: eCabinet Systems Software
Topic: V6 Improvements
Replies: 0
Views: 426

V6 Improvements

in version 6 are there ANY IMPOVEMENTS ON EDGE BANDING OF DRAWERS AND DRAWER FRONTS & DOORS as still we face problems with these stickers (half details on them)

i hope this issue should have been addressed in version 6
by mohan kommineni
Wed, Jan 20 2010, 2:38AM
Forum: Thermwood 3-Axis Machinery
Topic: pocketing in CN 5.50
Replies: 3
Views: 603

Re: pocketing in CN 5.50

thanks for that RYAN
i hope as you said this issue will be fixed in the next update release
ur suggestion has solved the issue for now
thanks
by mohan kommineni
Tue, Jan 19 2010, 12:50AM
Forum: Thermwood 3-Axis Machinery
Topic: pocketing in CN 5.50
Replies: 3
Views: 603

pocketing in CN 5.50

iam trying to do a simple job with 2 pockets of 7.5mmwide and 1150mm long through cut gives me error failed to create toolpath for the pocket operation

what is that missing in my settings,its fine with other jobs pls help
by mohan kommineni
Wed, Dec 02 2009, 6:36PM
Forum: Thermwood 3-Axis Machinery
Topic: not sure how to set te start point
Replies: 4
Views: 738

not sure how to set te start point

we are trying to do a job which got 6mm holes in 32mm apart in rows and 16mm apart in coloums and when i use dxf in cn it is using only one drill instead i want use 5 drills from the drill bank, what iam doing wrong pls advice

thanks
by mohan kommineni
Thu, Sep 03 2009, 6:17PM
Forum: Thermwood 3-Axis Machinery
Topic: can some one look into this please CN5.48
Replies: 4
Views: 810

Re: can some one look into this please CN5.48

There are future plans to allow customers to change the nesting but there is no time table on this option's release. As for now, when you have smaller nests like what you have, you are limited by what the Control Nesting software wants to do. The only way around this is to trick the software as I d...
by mohan kommineni
Thu, Sep 03 2009, 8:53AM
Forum: Thermwood 3-Axis Machinery
Topic: can some one look into this please CN5.48
Replies: 4
Views: 810

Re: can some one look into this please CN5.48

hi daniel i think i have to agree with u daniel computer is not so smart as human but what is the point in doing this trick again inspite of having so big control nesting and all the options like rotating componets and nesting in x and y directions and still we(human) have to spend time in finding o...
by mohan kommineni
Thu, Sep 03 2009, 2:10AM
Forum: Thermwood 3-Axis Machinery
Topic: can some one look into this please CN5.48
Replies: 4
Views: 810

can some one look into this please CN5.48

we r doing a job and getting stuck in layout problem is it is not nesting in the right way and using extra sheet had this problem in different jobs before aswell, but we got only 2 sheets(2400x1200) now and it is possible in 2 sheets practically, iam attaching the esj twd and machine settings aswell...
by mohan kommineni
Tue, Sep 01 2009, 11:11PM
Forum: Thermwood 3-Axis Machinery
Topic: CN5.48-CUT THROUGH POCKET RADIUS
Replies: 9
Views: 1950

Re: CN5.48-CUT THROUGH POCKET RADIUS

As of now, when a pocket area is larger than the pocket area through cuts value, the pocket is cut as an outline and does not do a cleanup pass. If you email me (program@thermwood.com) the export from your control nesting along with the esj file, I can take a look at what you are trying to accompli...
by mohan kommineni
Tue, Sep 01 2009, 9:10AM
Forum: Thermwood 3-Axis Machinery
Topic: CN5.48-CUT THROUGH POCKET RADIUS
Replies: 9
Views: 1950

Re: CN5.48-CUT THROUGH POCKET RADIUS

I'm not sure if I understand what you are wanting. It sounds like you are wanting to use a 5mm bit to do a cut through on a pocket cut in your countertops to create a pocket with a 2.5 inch radius in the corners. The pocketing routine will try to use the largest tool capable of doing this. If you a...
by mohan kommineni
Mon, Aug 31 2009, 6:23PM
Forum: Thermwood 3-Axis Machinery
Topic: CN5.48-CUT THROUGH POCKET RADIUS
Replies: 9
Views: 1950

Re: CN5.48-CUT THROUGH POCKET RADIUS

The software is designed to use the largest tool it can to perform a pocket and then use smaller tools for cleaning up the pockets. If you are wanting to use a smaller tool, you will need to uncheck pocketing for the larger tool in the tooling section but then it will not use this tool for any pock...
by mohan kommineni
Mon, Aug 31 2009, 1:16AM
Forum: Thermwood 3-Axis Machinery
Topic: CN5.48-CUT THROUGH POCKET RADIUS
Replies: 9
Views: 1950

CN5.48-CUT THROUGH POCKET RADIUS

hi all we are facing a problem today while machining ajob, one is through pocket and other one is blind pocket . in blind pockets iam able to control the radius by using settings in clean up but in through pockets it is using a tool larger than what i want how to control it,we have put the radius in...

Go to advanced search