Search found 1257 matches

by Rick Palechuk
Wed, Nov 07 2012, 3:33PM
Forum: eCabinet Systems Software
Topic: Several Different Construction Questions
Replies: 23
Views: 9650

Re: Several Different Construction Questions

Here is a quick surround as described earlier.
by Rick Palechuk
Wed, Nov 07 2012, 2:04PM
Forum: eCabinet Systems Software
Topic: Several Different Construction Questions
Replies: 23
Views: 9650

Re: Several Different Construction Questions

Scott, create a sheet material the same thickness and finish as the molding. Build a cabinet from it, remove all the parts except the sides and top. Now size it to the Depth, Height, and Width you need. Use backsets to adjust depth of part, and overall cabinet depth to set the parts from the wall.
by Rick Palechuk
Wed, Nov 07 2012, 1:49AM
Forum: eCabinet Systems Software
Topic: Several Different Construction Questions
Replies: 23
Views: 9650

Re: Several Different Construction Questions

Scott, take a look at this example job, in the elevation view, if you hover over the Toe Kick you will notice it is a cabinet with all the parts removed except the Toe Kick. The cabinet is the same depth as the other cabs, the toe kick inset has been adjusted 1/4" for the thickness of the mater...
by Rick Palechuk
Tue, Nov 06 2012, 9:43PM
Forum: eCabinet Systems Software
Topic: Several Different Construction Questions
Replies: 23
Views: 9650

Re: Several Different Construction Questions

Hi Scott, welcome aboard. The toe kick, do you need to create a proper working cut list, or just to sell the job? When you create components, you need to use correct sizing. No push, pull, or extruding. Sometimes building assemblies in the Cabinet Editor, saving, then taking them to Room Layout turn...
by Rick Palechuk
Sat, Nov 03 2012, 7:18PM
Forum: eCabinet Systems Software
Topic: Version 6 Build 9?
Replies: 3
Views: 1807

Re: Version 6 Build 9?

by Rick Palechuk
Sat, Nov 03 2012, 1:07AM
Forum: eCabinet Systems Software
Topic: Slot Slide Settings
Replies: 4
Views: 3020

Re: Slot Slide Settings

Hey Mike, it allows you to design a drawer box where the bottom is extended into dados in the cabinet, and used in place of slides.
by Rick Palechuk
Mon, Oct 29 2012, 8:50PM
Forum: eCabinet Systems Software
Topic: Feature Requests
Replies: 40
Views: 15708

Re: Feature Requests

Hey Brenda, could you create the hole pattern in a standard cabinet, then take the gable to Countour and save the hole pattern as a Parasoild file. That way you could apply to a gable without holes. The problem that I see with this is will the router recognize them as holes and drill them, or try to...
by Rick Palechuk
Sun, Oct 28 2012, 11:47AM
Forum: eCabinet Systems Software
Topic: Grouping parts
Replies: 2
Views: 1445

Re: Grouping parts

Hey Tim, we do allot of flat panel, and mitering. We found using Autocad for the layouts to be the most efficient use of time.
by Rick Palechuk
Tue, Oct 23 2012, 11:00PM
Forum: eCabinet Systems Software
Topic: Door pulls and knobs
Replies: 3
Views: 1659

Re: Door pulls and knobs

http://www.ecabinetsystems.com/ecabinet ... pdates.htm They have them is low and high resolution.
by Rick Palechuk
Mon, Oct 22 2012, 10:54PM
Forum: eCabinet Systems Software
Topic: Graphics Problem
Replies: 4
Views: 1835

Re: Graphics Problem

Hi Mike, What is your resolution set at?
by Rick Palechuk
Sun, Oct 07 2012, 8:05AM
Forum: eCabinet Systems Software
Topic: Importing .DXF in Contour mgr
Replies: 4
Views: 2689

Re: Importing .DXF in Contour mgr

I saved it as an older version of cad (R12), that converts the Spline to Pline, it works, slow going in the PE. HTH
by Rick Palechuk
Sat, Oct 06 2012, 1:36PM
Forum: eCabinet Systems Software
Topic: Importing .DXF in Contour mgr
Replies: 4
Views: 2689

Re: Importing .DXF in Contour mgr

Hey Wayne, can you zip and and post the DXF, and I will see what it does for me.
by Rick Palechuk
Thu, Sep 06 2012, 2:26PM
Forum: Thermwood 3-Axis Machinery
Topic: 91000 G2 Supercontrol Monitor
Replies: 7
Views: 3548

Re: 91000 G2 Supercontrol Monitor

Josh, you can get an adapter for VGA to DVI.
by Rick Palechuk
Sat, Aug 25 2012, 10:26AM
Forum: eCabinet Systems Software
Topic: drag lines
Replies: 11
Views: 5792

Re: drag lines

Hi Ray, post your computer spec.
by Rick Palechuk
Tue, Aug 21 2012, 2:16PM
Forum: eCabinet Systems Software
Topic: Building a new computer, need input.
Replies: 2
Views: 1295

Re: Building a new computer, need input.

That will work fine.

Go to advanced search