Thermwood / eCabinet Systems

Dave,

It seems to load just fine on mine. I would clear your browser history and cache to make sure it isn't trying to find an older server location.

-Clint-

Tony, Try from this link http://www.ecabinetsystems.com/ecabinet_systems_production_sharing_main.htm. I have no issue loading in IE, Mozilla, or Chrome. If you are going through the Thermwood main page and searching it you are possibly digging up an old link. What are you putting in the Goggle Searc...

Sorry, I have been out of office for the past week. Is this working for everyone? I do not currently receive any errors when navigating the site.

-Clint-

Manoli, I replied to your email. On a side note, if a dado is set to be .5" deep and your material is .75" deep, it may or may not leave you with .25" of material. If you have a depth or fit clearance for the dado, the leftover material in eCabinets will measure exact. However, when i...

It has been mentioned and added to our wish list. We do appreciate any and all suggestions to make the software better for everyone.

When you open the designer, first select either door or drawer at the top. You then select your source whether it be Slab, MDF, etc. Then click the blue text that reads "Standard", and then click one of the standard doors. Make your changes in material, costing, etc (if any) and click save...

If you unzip the folder or open it, is there a file named EZDRM_AIR_PLAYER2.2.1.air? The .air file is an installer package, not a typical .exe file.


If you cannot locate it, email me at cabinets@thermwood.com, and I'll email back what mine downloads when I click on the link in step 2.


-Clint-

yeh i know you can do that, we just want to use the cnc file instead of having to nest it in all the time. we have a work around so its fine was just seeing how hard it would be to do Just so we are clear on terminology, the CNC file is what is generated by Control Nesting. It is the file that cont...

You're welcome. An issue that may arise however is that a stretcher does not divide a cabinet into openings for doors and drawers. If you need to divide openings you can add a shelf over top of a stretcher and make the shelf a phantom part do it doesn't show up on a cut list or for CNC. You can then...

Jesse, You were almost there with your thinking. Instead of using a fixed shelf, use another stretcher as a shelf. I attached an example of how to go about it. I used the Advanced button to associate Inset 4 to the front of the back stretcher. That way if material thickness changes the inset value w...

Don, Do you have a DropBox account? If you do load the file there and email the link for it to cabinets@thermwood.com If you don't you can go to http://www.dropbox.com and sign up for one. It is a free file sharing website. After you have signed up and logged in, there is a button to upload a file. ...

Using the advanced button can make life so much easier once you get used to it. Obviously it's situational if you may need it, but I started using stretchers quite a bit when working on a specific library. Without using the associations I was doing part editor cuts to achieve the dados I needed. Onc...

I hadn't thought of using a face frame piece to cover the entire cabinet. I've always just used a stretcher and used the advanced button to associate it to multiple parts of the cabinet, then had it apply construction settings on the front of each piece. The associations keep away the funky negative...

Shaun, If you go into Settings and Preferences and click the check boxes on the left for Force Software Rendering and Use Graphics Double Buffering, restart eCabinets, does it still crash? It will be extremely laggy, but we are mostly just seeing if that avoids a crash. If it does not crash, its mos...

Mike,

I got you a code sent out this morning. The email it eCabinets is registered under was the same one you used to email cabinets@thermwood.com. If you would like it updated to a different email, reply to the email I sent you with the correct email and I will update it.