Thermwood / eCabinet Systems

While in e-cab I deleted two cabinets by accident and they didn't show up in my recycling bin and I would love to get them back somehow! Does anyone have a clue on how to do this?

I agree! The fall back to a pocket would be wonderfull! Thanks

Once in a while, we have cabinets that use a Hidden Tenon at 100% the thickness. In this case it is 1.22'' thick. When we get to the machine to machine the part with the pocket for this tenon, it searches for a tool that has the width of 1.01'' to 0.505''. We often use a half inch downcut for this ...

Is it possible in the next version of the controll nesting to be able to change the name of Off-fall material to match.
we use the size of the material in the name, therefore a 3/4'' MDF sheet 5x10 off-fall could be used in a job using only 3/4'' MDF 4x8 sheets
This would save a couple minutes each ...

Been searching for a way to have a different hole pattern between the left and right side of a drawer (Without creating a second cabinet and using different drawer patterns for both and selecting a side panel from each one).. Has anyone found anything that could help me??

Thanks! This explains a lot!!

I have a 2-9/16'' hole for a cable grommet drawn in e-cabinet that goes through my piece and because of this it cuts the hole in one pass which creates a piece of malemine which gets stuck between the cutter head and vacuum and then jams the machine while trying to change tools!!!! Is there a ways ...

I'll try to clarify my problem! The problem is when we use the control nest to nest dxfs that are in an arc form. the outline ramp-in doesn't realise that it is an arc and therefore cuts straight the length of the in-ramp and then follows my arc. This has been happening only since the latest update ...

Recently we've been noticing that when we try to cut a 4inch arc using a *.dxf in the control nesting, it seems to cut the in-ramp corner straight into our piece then follow the correct arc and then it finishes again notched inside the arc!!!! :wall: checked the dxf and there is nothing out of the ...

The new Update has resolved this problem!! Thank You!!!

All thats missing for us now is an option for shelf holes in the back and to be able to split backs without using stretchers

Again Thanks!

The control Nesting is V5.78 but it seems to believe that the drawers are 14'' wide and 6'' high (in a way is true) but the drawer front with grain is 14'' long and 6'' wide and this causes en error in nesting at the CNC...

Here are two assemblies that we tried. One works since the Grains is in-line with the heigth and width.

I've been trying to group a line of Drawer fronts across 3 cabinet,s approx. 30'' wide 6'' high with the grain going the length of all three cabinets.
When I add the drawers into the cabinet it always sais the width is 30'' and the height is 6'' even when I rotate the grain, and because it thinks it ...

I've been trying to group a line of Drawer fronts across 3 cabinet,s approx. 30'' wide 6'' high with the grain going the length of all three cabinets.
When I add the drawers into the cabinet it always sais the width is 30'' and the height is 6'' even when I rotate the grain, and because it thinks it ...

Didn't realise i already posted this sorry about that!!!