Thermwood / eCabinet Systems

Hi,

Just came across that the formula settings when in shelf hole settings is giving incorrect values.

Ie: Cabinet width of 700mm, I go to apply holes on the back of a cabinet on the left inset with the formula: CabinetWidth/3 which should be 233.33mm but it says 5926.68mm?? Same happens on the ...

Hi,

Just a small suggestion that would be quite handy, being able to offset the position of the shelf hole ie from the bottom of the shelf, as we use shelf studs that have a 5mm high plastic support from the steel pin so I need to offset the hole by 5mm to make the shelf centre of the cabinet.

I ...

Hi tim,

Yeah very familiar with it, what I'm saying is it only offsets one line at a time not the whole box as such

Cheers

Hi there,

Is there an easier way to copy a complete closed contour and enlarge or decrease the size for example, I make a 55mm frame and want to do a 47mm profiled edge on the inside, at the moment I create my 55mm edge and do the pocket cut, then I create edges and copy each inside edge by 8mm and ...

Hi,

I'm finding that with upgrading to windows 10, ecabinets is forever crashing, I'm having to save a batch list after each cabinet I create/edit in the list otherwise the program will crash

Is this issue resolved in the latest version?

Cheers
Shaun

Hi,

Is there any idea of how far along as to when version 6.1 will be released? Could really do with some of the new features about now and also some of the bugs fixed

Cheers!

Thanks Scott!

Can't wait for the next version to be released, any idea on when that might be?

Hi there,

Maybe a silly question, but is there a way to lock a fixed shelf in place, so when resizing the cabinet, it stays in the same fixed position say from the very bottom of the cabinet or the top of the toe kick position.

An example of a cabinet i use is attached, at the moment when i ...

Thanks for taking the time to go through this Scott, have taken your advice and have gone with your steps (seems much simpler and less time consuming!) I can now carry on as per normal!

Regards,

Shaun
Not Just Kitchens LTD

Drawers.hsf Drawers.jpg
Hi Scott,
This is just one that's in my library which i have been using for years, havent changed anything to it. Now when i go into contraint manager, then exit out (and hit apply changes (even if i didnt do any)) then i go back into it, the profile constraints are gone ...

Hi there, i've just recently got the latest build for ecabinets, and now ive noticed that when i do a profile cut (on a door) and go to contraint mangage it, when i get out of the contraint manager after applying the changes and then go back into it, the contraints have disappeared from the ...

Hi, it seems everytime now i goto the part editor to profile panels, it seems to crash on me :wall:
Its when i go to do the second profile edge, it comes up with the error errorparteditor.png saying ecabinets has stopped working grr. Ive done this many times and its only just started coming up with ...

Rick Deskins wrote:Do the following:

Download, then install this Microsoft Visual C++ redistributable from http://www.microsoft.com/download/en/de ... en&id=5638

Thanks Rick, that's done the trick!

Shaun
Not Just Kitchens LTD

Hi there,

I have an error come up after trying to install the corner and special cabinet library from the eCabinets website.. any ideas on getting this working? I've attached a screenshot of the error message i get..

Thanks,

Shaun
Not Just Kitchens LTD
NZ