Posible moulding bug

Rick Palechuk · Post by **Rick Palechuk** » Sun, Jul 22 2007, 7:05PM

I applied moulding to a cab, took it back to the CE, changed the width of the cab and the moulding disappeared. So I took the cab back to the ME, didn't do anything, brought it back and it had the moulding applied at the proper width. Anyone finding the same issue?

Brian Shannon · Post by **Brian Shannon** » Sun, Jul 22 2007, 8:33PM

Rick,

I get this too. After CE rebuilds the cabinet, the moulding is gone but if I left click anywhere on the screen, the moulding shows up in the new size.

Brian

Rick Palechuk · Post by **Rick Palechuk** » Sun, Jul 22 2007, 9:28PM

Now it seems to be working fine.

Al Navas · Post by **Al Navas** » Sun, Jul 22 2007, 9:34PM

I see the same problem, but the molding is restored after taking it into the ME the second time.

This is reminiscent of the problem and the workaround with the countertops in Build 3.

Al

Rick Palechuk · Post by **Rick Palechuk** » Sun, Jul 22 2007, 11:10PM

I don't think it's that cut and dry Al, because I just tried it with a different cab and it worked fine.

Rick Palechuk · Post by **Rick Palechuk** » Sun, Jul 22 2007, 11:19PM

Ok, I've tried both seed and my library and no difference. Press home and the moulding comes back. So it's probably not that big of a deal.

Thermwood / eCabinet Systems

Posible moulding bug

Posible moulding bug