cabinets not showing on elevations

brian bowden · Post by **brian bowden** » Sun, Aug 19 2007, 9:03AM

While in custom layout -detail room after moving and editing cabinets some do not show up in the elevation. I have tried everthing do display these. Could some one please advise as this program is new to me

Kerry Fullington · Post by **Kerry Fullington** » Sun, Aug 19 2007, 9:08AM

Brian,
In the overhead view highlight the missing cabinet then mouse over the top of the wall that you are trying to view the elevation of. The wall will highlight yellow then right click and choose Associate to wall.
Now when you go to this walls elevation the cabinet will appear. Repeat for any other cabinet or wall. You can only associate one cabinet at a time.
Kerry

David Werkheiser · Post by **David Werkheiser** » Sun, Aug 19 2007, 2:46PM

Brian,
I might add to Kerry'spost. That if your \"Inset Item Method\"is set to
\"freestyle\" when cabinets are added to room, than they will not show up in wall elevation. This and accessing the \"associate to wall\" gave me problems for a long while
David Werkheiser

Nick M Singer · Post by **Nick M Singer** » Sun, Aug 19 2007, 10:13PM

You are also probably a victim of a long standing bug where objects dissociate themselves randomly from walls. I have just been doing a layout where the cabinets associated themselves at random with the opposite wall, and items I put into the layout disappear entirely even though their parts still appear in the nesting diagrams

DanEpps · Post by **DanEpps** » Mon, Aug 20 2007, 6:53AM

Nick M Singer wrote:You are also probably a victim of a long standing bug where objects dissociate themselves randomly from walls. I have just been doing a layout where the cabinets associated themselves at random with the opposite wall, and items I put into the layout disappear entirely even though their parts still appear in the nesting diagrams

Before or after visiting the pub Nick?

Nick M Singer · Post by **Nick M Singer** » Mon, Aug 20 2007, 11:55AM

Sometimes you gotta drink some pretty strong stuff to keep on working in eCabs Dan

Jerry McClain · Post by **Jerry McClain** » Mon, Aug 20 2007, 9:04PM

Does the problem seem to happen more when the cabinet is at a wall intersection?

Kerry Fullington · Post by **Kerry Fullington** » Tue, Aug 21 2007, 6:41AM

Nick,
I haven't had a problem with cabinets losing their associations to wall in a long time. If you are still having this problem with version 5.1 build 4 then send the ecab guys an example of a room that does this so they can reproduce the problem and fix it.
Kerry

Jerry McClain · Post by **Jerry McClain** » Tue, Aug 21 2007, 10:13AM

I can't say that it is losing association all together, its just associating to the wrong wall. Usually the wall farthest from the cabinet placement. I think there is no guessing where it will associate. Its not a major deal just a little nagging thing that makes you go hmmmmm.

brian bowden · Post by **brian bowden** » Sun, Sep 02 2007, 3:56AM

thanks for your response. Sorry for the later reply the computer hasnt been working for a while, but its now up and running. thanks to all.

Michael Yeargain · Post by **Michael Yeargain** » Mon, Sep 03 2007, 10:14AM

On many occasions I have had cabinets associate themselves to other walls as well as the wall it was placed on. And a few times when the cabinet did not associate to a wall while in \"align to back\" mode.

It appears to be just random to me as well.

Jeremy Schiffer · Post by **Jeremy Schiffer** » Fri, Sep 14 2007, 8:47PM

The cabinets also lose their edgebanding data when they lose their wall associations. I can reproduce it using the standard cabinets. I think I sent that one in, not sure. If I could remember the steps I'd post it here so ya'll could double-check me.

Thermwood / eCabinet Systems

cabinets not showing on elevations

cabinets not showing on elevations

Re: