Custom Layout glitch

BenRatt · Post by **BenRatt** » Tue, Oct 30 2007, 6:24AM

When I am loading a cabinet in Custom Layout and choose to resize the width of the cabinet, the cabinet height decreases. Is anyone else having this problem??

DanEpps · Post by **DanEpps** » Tue, Oct 30 2007, 6:57AM

Are you using the \"Change Size\" button on the \"Load Item\" dialog? I just tried it that way and had no problems.

Paul Ellis · Post by **Paul Ellis** » Tue, Oct 30 2007, 7:39AM

Dan,
If you have a closer look at the picture, you will see that the cabinet(s) on the end have their grain oriented from top to bottom and not left to right. I think that totally confused the tessalation generator in the quantum drive motor.

Ben,
Sorry for that one...

BenRatt · Post by **BenRatt** » Tue, Oct 30 2007, 10:57AM

This has happened to me with at least two different cabinet designs, but it doesn't do it with every cabinet design. I am attaching the file for the cabinet that is shown in the picture in my previous post. This cabinet shrinks wheather I increase or decrease it's width.

DanEpps · Post by **DanEpps** » Tue, Oct 30 2007, 12:23PM

Nope, still don't happen for me Ben. I add one to the room without changing anything then added a second, changing the width to 48\".

Michael Yeargain · Post by **Michael Yeargain** » Tue, Oct 30 2007, 1:40PM

It sure did change height on me.

BenRatt · Post by **BenRatt** » Tue, Oct 30 2007, 1:46PM

I don't get it Dan. I just did the same thing you did but I'm still having the problem. I don't know why it would be OK on your machine but not work on mine. Anybody have any ideas?

Walker T Scott · Post by **Walker T Scott** » Tue, Oct 30 2007, 1:58PM

Ben

I can reproduce this and have passed it along to the programmers. Sorry for the inconvenience.

Walker

BenRatt · Post by **BenRatt** » Tue, Oct 30 2007, 2:00PM

Thanks Walker

DanEpps · Post by **DanEpps** » Tue, Oct 30 2007, 2:39PM

My question is...why can everyone but me reproduce the problem?

Here is what I'm doing:

1. Create a wall
2. Insert cabinet \"as is\"
3. Insert same cabinet but this time, click the \"Change Size\" button in the \"Load Item\" dialog.
4. Set the width to 48\" and leave all other dimensions as is.

Are these the exact steps the rest of you are using?

Rick Deskins · Post by **Rick Deskins** » Tue, Oct 30 2007, 2:51PM

This is the result of saved cabinet in a older version (happened with cabs with detached toes). The cabinet height was saved wrong. When you click on the cabinet in Load dialog, you see the height was 26.5\". However when you load the cabinet in cabe ditor, you see the height is 32\". Resave the cabinet in cabeditor and it will fix you change size problem in the Custom Layout Editor.

BenRatt · Post by **BenRatt** » Tue, Oct 30 2007, 3:08PM

Awesome, thanks Rick

DanEpps · Post by **DanEpps** » Tue, Oct 30 2007, 4:28PM

That answers my question...I saved it first.

Thermwood / eCabinet Systems

Custom Layout glitch

Custom Layout glitch