Line Drawing Editor Problem

Gene Kimmi · Post by **Gene Kimmi** » Sun, Jan 20 2008, 3:58PM

Sometimes when I take a cabinet or usually the custom layout to the line drawing editor, everything is red or black. Usually I can delete the page and take the cabinet or layout to the editor again without problems, but today it did this every time. I had to shut the program down and reopen the job before it would work right,
Does anyone ever have this problem. When working on larger jobs, I have had this happen several times. Here is the image I get when this happens.

Justin Melhiser · Post by **Justin Melhiser** » Mon, Jan 21 2008, 9:45AM

Gene
Send me that custom layout or cabinet you were taking to the LDE. Also what are the specs of your computer and graphics card.

Gene Kimmi · Post by **Gene Kimmi** » Mon, Jan 21 2008, 11:03AM

Justin,

Here is the job I was working on when this happened. I am using a Dell M90, 2 GB, with the Nvidia Quadro 2500 card. Thanks.

Justin Melhiser · Post by **Justin Melhiser** » Mon, Jan 21 2008, 1:12PM

Gene
What is the memory size of your graphics card?

Gene Kimmi · Post by **Gene Kimmi** » Mon, Jan 21 2008, 1:22PM

Justin,

It is a 512mb card. This has never been a consistant problem until on this job yesterday. Thanks.

Justin Melhiser · Post by **Justin Melhiser** » Mon, Jan 21 2008, 2:32PM

Gene
Have you tried running a repair from the eCabinet Systems cd? If not try that.

Lamar Horton · Post by **Lamar Horton** » Mon, Jan 21 2008, 6:14PM

That has happened to me a couple of times. I think a restart of the program and maybe the computer took care of it.

Lamar

Thermwood / eCabinet Systems

Line Drawing Editor Problem

Line Drawing Editor Problem

Re: Line Drawing Editor Problem

Re: Line Drawing Editor Problem

Re: Line Drawing Editor Problem

Re: Line Drawing Editor Problem

Re: Line Drawing Editor Problem

Re: Line Drawing Editor Problem