What would be the process of converting a .x_t file and getting it into eCab? .x_t is a parasolid file format.
Thanks
Convert .x_t files format
Moderators: Jason Susnjara, Clint Buechlein, Jason Susnjara, Clint Buechlein
-
Robert Williams
- Junior Member
- Posts: 25
- Joined: Tue, Jan 02 2007, 5:57PM
- Location: Georgia
-
DanEpps
- Wizard Member
- Posts: 5852
- Joined: Thu, Jul 28 2005, 10:18AM
- Company Name: Dan Epps
- Country: UNITED STATES
- Location: Rocky Face GA
Re: Convert .x_t files format
X_T files are only used for Shape Manager tools in eCabinets. If you have a tool that is in X_T format, copy it to your tools folder (usually a folder underneath My Profile Tools).
-
Robert Williams
- Junior Member
- Posts: 25
- Joined: Tue, Jan 02 2007, 5:57PM
- Location: Georgia
Re: Convert .x_t files format
how about .3dm or .iges?
-
DanEpps
- Wizard Member
- Posts: 5852
- Joined: Thu, Jul 28 2005, 10:18AM
- Company Name: Dan Epps
- Country: UNITED STATES
- Location: Rocky Face GA
Re: Convert .x_t files format
What are they made with? Can the program they are made with create a DXF file?
-
Robert Williams
- Junior Member
- Posts: 25
- Joined: Tue, Jan 02 2007, 5:57PM
- Location: Georgia
Re: Convert .x_t files format
They were created in UGS Solid Edge, and the assemblies can only be exported in the following formats: .UG, .IGES, .STEP, .XGL, .XML, .CATIA, Prodcutvision Document, and Parasolid Document
Thanks,
Thanks,
-
DanEpps
- Wizard Member
- Posts: 5852
- Joined: Thu, Jul 28 2005, 10:18AM
- Company Name: Dan Epps
- Country: UNITED STATES
- Location: Rocky Face GA
Re: Convert .x_t files format
I don't know whether you can convert any of those file types with AccuTrans3D or not. You can download a trialo version and try it. Go to http://www.micromouse.ca to download.
-
George Davidson
- eCabinets Beta Tester
- Posts: 1585
- Joined: Tue, May 17 2005, 1:16PM
- Location: Norwood Pa.
Re: Convert .x_t files format
Hi Robert
Could you put the .x_t format into a (.STEP format) and I will try to open it for e-Cabinet
do you have TurboCad. You could convert it in there
Could you put the .x_t format into a (.STEP format) and I will try to open it for e-Cabinet
do you have TurboCad. You could convert it in there
-
Kerry Fullington
- Wizard Member
- Posts: 4734
- Joined: Mon, May 09 2005, 7:33PM
- Company Name: Double E Cabinets
- Country: UNITED STATES
- Location: Amarillo, TX
Re: Convert .x_t files format
Robert,
I was able to import IGES Files (.igs) into Alibre Express (which is free) and export the model in stereo lithography (.stl) format that you can then open and edit in the eCabinets Display Parts Editor. Alibre Express will also import Rhino files (.3dm). I haven't tried this one.
Kerry
I was able to import IGES Files (.igs) into Alibre Express (which is free) and export the model in stereo lithography (.stl) format that you can then open and edit in the eCabinets Display Parts Editor. Alibre Express will also import Rhino files (.3dm). I haven't tried this one.
Kerry