Labels

Dave Burtchell · Post by **Dave Burtchell** » Sun, Oct 16 2005, 6:30PM

Hi

Does anyone have a source for low stick labels for the DYMO label writer?
The regular labels are fine for our customers, but the parts we cut for our own shop need a label with less stickum.

Thanks,
Dave

Brian Shannon · Post by **Brian Shannon** » Sun, Oct 16 2005, 7:49PM

I just shoot them with \"Goof Off\" and they come off very easy. I'm using a Brother label printer.

Thom Davies · Post by **Thom Davies** » Sun, Oct 16 2005, 10:55PM

Hey Dave how's it going?

You can buy labels from thermwood which are the best i have tried and i have tried a few other dymo labels and they get very sticky when left on the board.

Brian Shannon · Post by **Brian Shannon** » Sun, Oct 16 2005, 11:10PM

Do these labels from Thermwood come in a spool or sheet?

Brian

Thom Davies · Post by **Thom Davies** » Mon, Oct 17 2005, 4:36PM

If spool means a roll yes they do

Brian Shannon · Post by **Brian Shannon** » Mon, Oct 17 2005, 7:19PM

Yes, I do meen roll. Thanks for the info.. I'll have to try them.

Brian

Thermwood / eCabinet Systems

Labels

Labels