why won't this job nest?!?!

[Jason Gooch]

the subject line says it all. i've tried deleting cabinets one by one to figure out if one is a problem, no luck. can somebody please give me a hand? thanks.

[Leo Graywacz]

It wouldn't nest for me either. But I went to the filter it and when I looked some of your parts have some odd dimensions. Some have very large negative numbers for parts dimensions. I am sure this is what is causing the problem for you. Sounds like you need to look at those cabinets, probably have to rebuild them.

[Jason Gooch]

I'll check it out, thanks Leo. That kinda thing has happened before - weirdo numbers like -799999.99.... No idea why this is happening.

Thanks - J

[Rob Perry]

Jason, Try highlighting Cabinets individualy or groups of cabinets & going to cutlist. Find the cabinet or cabinets that are showing a negative number of sheet goods.
Take the offending cabinet or cabinets to the Cabinet editor one at a time.
Go to a editor such as add doors or shelves and then go back to main. Now check the cutting list for that cabinet.
Hopfully the cut list looks proper now. Return to layout & Try to nest the job now.
Make sure you fix all offending cabinets if there is more than one.

I have had this problem a few times and that is how I fixed it.

[Rob Perry]

Jason

The problem is in Cabinets 7, 8, 9, 10 & Filler #11

I tried what I mentioned in my previous post & It WILL Fix the problem.
It nested fine after I took each cabinet to the editor so the cabinet could regernerate itself

It must be some bug or something

[Leo Graywacz]

Glad to hear you got the issue worked out.