I have searched the forum and read a great deal on STL files but how do I actually import one and convert it to an hsf and jpg file set? I am sorry, I guess I am just slow.
Bill
Import an STL file
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal, Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
BillHightower
- Junior Member
- Posts: 83
- Joined: Sat, Dec 24 2005, 5:55PM
- Location: Highlands, North Carolina
-
Kerry Fullington
- Wizard Member
- Posts: 4764
- Joined: Mon, May 09 2005, 7:33PM
- Company Name: Double E Cabinets
- Country: UNITED STATES
- Location: Amarillo, TX
Re: Import an STL file
Bill,
Place your .stl file where you can find it.
Open eCabinets and go to the Display Part Editor
Click on Open hsf/stl and navigate to your .stl file
Open the .stl in the Display Part Editor and apply a texture and make any other changes you want
Click Save and place it in a directory using the save dialog
It creates the .jpg along with the .hsf
Your .hsf will be in your eCabinets/import/whatever file you created
ps. Did you finish your office? I would like to see some pictures.
Kerry
Place your .stl file where you can find it.
Open eCabinets and go to the Display Part Editor
Click on Open hsf/stl and navigate to your .stl file
Open the .stl in the Display Part Editor and apply a texture and make any other changes you want
Click Save and place it in a directory using the save dialog
It creates the .jpg along with the .hsf
Your .hsf will be in your eCabinets/import/whatever file you created
ps. Did you finish your office? I would like to see some pictures.
Kerry
-
BillHightower
- Junior Member
- Posts: 83
- Joined: Sat, Dec 24 2005, 5:55PM
- Location: Highlands, North Carolina
Re: Import an STL file
Kerry,
Thank you very much. I got it!
We had all the parts of the office cut by Bill Rutherford. They came out beautifully but we have not had time to completely finish it.
Bill
Thank you very much. I got it!
We had all the parts of the office cut by Bill Rutherford. They came out beautifully but we have not had time to completely finish it.
Bill
-
Kerry Fullington
- Wizard Member
- Posts: 4764
- Joined: Mon, May 09 2005, 7:33PM
- Company Name: Double E Cabinets
- Country: UNITED STATES
- Location: Amarillo, TX
Re: Import an STL file
Bill,
I just finished converting all the Osborne Wood Products .stl files to .hsf. (371 files)I took them into Accutrans to make sure they would rotate properly then opened them in the Display part editor and gave them textures and saved them as display objects. This makes them very easy to use. If you would like a copy of this let me know and I will send you a link to download.
I am also about half way through converting the Hardware Resources wood products.
Kerry
I just finished converting all the Osborne Wood Products .stl files to .hsf. (371 files)I took them into Accutrans to make sure they would rotate properly then opened them in the Display part editor and gave them textures and saved them as display objects. This makes them very easy to use. If you would like a copy of this let me know and I will send you a link to download.
I am also about half way through converting the Hardware Resources wood products.
Kerry
-
Dennis Englert
-
Peter Walsh
- Guru Member
- Posts: 460
- Joined: Thu, May 19 2005, 3:15PM
- Location: Palm Springs, Ca
- Contact:
Re: Import an STL file
Kerry,
Put me on your list for those conversions. I have some, but not all of the Osborne and none of the Hardware Resources. Many, many thanks for this work. I wish more vendors would do this for us. Thanks again.
Regards,
Put me on your list for those conversions. I have some, but not all of the Osborne and none of the Hardware Resources. Many, many thanks for this work. I wish more vendors would do this for us. Thanks again.
Regards,
-
Dennis Englert
Re: Import an STL file
I'm sorry, somehow my response tagged onto the wrong topic. This should've been appended to the topic about no replies from Thermwood.
Dennis
Dennis
-
BillHightower
- Junior Member
- Posts: 83
- Joined: Sat, Dec 24 2005, 5:55PM
- Location: Highlands, North Carolina
Re: Import an STL file
Kerry,
Yes. I would appreciate the files. Email me the link. I have some but not the number you are talking about. I live about 1 hour from Osborne during the summer and I plan on visiting them this year.
Bill
Yes. I would appreciate the files. Email me the link. I have some but not the number you are talking about. I live about 1 hour from Osborne during the summer and I plan on visiting them this year.
Bill
-
Chris Harmon
- Junior Member
- Posts: 39
- Joined: Sat, Apr 04 2009, 10:20PM
- Company Name: Azure Cabinets
Re: Import an STL file
Kerry,
I would also like Osborne Wood Products .stl files to .hsf. files. Can you PM me the link.
Thanks, Chris
http://www.azurecabinets.com
I would also like Osborne Wood Products .stl files to .hsf. files. Can you PM me the link.
Thanks, Chris
http://www.azurecabinets.com
