I am having trouble with my shopbot link. When I drill shelf pin holes I get the ones on the right side breaking the melamine on the back side. The left sides are good. When I view the file it is going to within .01" of material depth. .635 material is drilling to .6251. Should be to 3/8". On the attached file all the uppers are like this. Won't attach. I get message extension TWD not allowed
Lorin
shopbot-drilling shelf pin holes to deep
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal, Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
Lorin Ylioja
- Junior Member
- Posts: 39
- Joined: Tue, Apr 14 2009, 10:25PM
- Company Name: Heritage Woodcraft
- Location: Conquest Saskatchewan
-
Rick Palechuk
- Wizard Member
- Posts: 1896
- Joined: Wed, May 18 2005, 7:54PM
- Company Name: Milltech Millworks Ltd.
- Country: CANADA
- Location: Edmonton, Alberta
- Contact:
Re: shopbot-drilling shelf pin holes to deep
Zip the file.
-
Lorin Ylioja
- Junior Member
- Posts: 39
- Joined: Tue, Apr 14 2009, 10:25PM
- Company Name: Heritage Woodcraft
- Location: Conquest Saskatchewan
Re: shopbot-drilling shelf pin holes to deep
I hope this worked. It is for the whole job. Cabinet 4 is one of the examples.
thank you
Lorin
thank you
Lorin
-
Lorin Ylioja
- Junior Member
- Posts: 39
- Joined: Tue, Apr 14 2009, 10:25PM
- Company Name: Heritage Woodcraft
- Location: Conquest Saskatchewan
Re: shopbot-drilling shelf pin holes to deep
I just rebuilt the cabinets.
