New Drawer Box Problem

[Georgi Baltov]

Hi Guys,

here's another one from me. I am giving all the files that might help you but if you need more let me know. The sizes and nest looks good but in the CNC file it's looking for some large tools to dado with. For now it seems we will be stuck with these as I have upgraded to V6.

I use "Standard Drawer - Accuride" as template to make the needed sizes and save them as "Buddy DBX - 13 1-2x 4x 20 - 3pc" and "Buddy DBX - 13 1-2x 8x 20 - 1pc". When I load in Control Nesting I change the quantity to 3 pcs and 1 pc as shown in the name. Then I nest and when I try to write I get the warning that a proper tool has not been set up.

Let me know if you need more information to solve the problem.

Thanks

[Georgi Baltov]

The problem exists with CN 5.50. I used a job that I need to cut in the coming days. Let me know if more information is required. Everything else writes with no error. The tooling is

[Scott G Vaal]

Georgi,

Thanks, that is all the info we need. I was able to reproduce it and have it listed to be fixed as soon as possible. Sorry for the inconvenience.

[Georgi Baltov]

Scott,

I don't mean to be pain but I need an update on that issue. Is it eCab issue or Control Nesting. I tried nesting the same job with v5.52 and got exactly the same problem. I have a bunch of boxes to cut. I can ask the shop to build them "old school". No hurry, no pressure, just need an update.

Thanks