Drawers not working

[Bruce Koch]

I have designed drawers in the designer and to get the cutlist to work right it shows the bottom out past the sides. I have been getting varied results in v 6. Suggestions?

[Rick Deskins]

By drawers, I'm assuming that you mean Drawer Boxes and not Drawer Fronts. Can you post a cabinet file or drawer box file and give some step to reproduce what you are seeing?

Thanks,
Rick

[Bruce Koch]

I have never posted files before so I don't know how to do it. Any help?

[Samuel v Mayer]

Well Bruce, all you have to do is go to the reply post and at the bottom under your message there is an upload attachments button. Just go there and you can upload the file you are having trouble with!

[Bruce Koch]

I hope this works.

[Bruce Koch]

When I design a drawer box in the designer program and all the dimensions come out the way I want and save it, then I install it in a cabinet the dimensions for the box are wrong. For instance in the design mode a 22.5 deep box has a 21.5 inch side and then in the cabinet the drawer box with a dim. of 22.5 comes up 21. Also bottom dim. changes according to the initial settings

[Kerry Fullington]

Bruce, Rick,

It sounds like this problem might be related to This Thread