In CE open the Std Base Frameless
Bring the cabinet into the Drawer Box Editor
Select a default Drawer Box
Select a default Drawer Box Slide Hole Pattern
Add a 4" drawer box at the top of the opening in the cabinet
'Yes' to apply the slide hole pattern
Return to CE
Shorten cabinet height by 10"
-Slide holes remain in original position (outside of cabinet).
Slide Hole not Changing with Cabinet Height
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal, Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
Nat Wheatley
- eCabinets Beta Tester
- Posts: 491
- Joined: Wed, Apr 15 2009, 8:22PM
- Company Name: Plymouth Custom Closets
- Country: UNITED STATES
- Location: Plympton, MA
Slide Hole not Changing with Cabinet Height
http://www.plymouthcustomclosets.com
Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3
Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3
-
Ryan Callahan
- Thermwood Team
- Posts: 586
- Joined: Tue, Jul 14 2009, 11:05AM
- Company Name: Thermwood Corporation
- Country: UNITED STATES
- Location: Thermwood
- Contact:
Re: Slide Hole not Changing with Cabinet Height
Nat,
Yes, this is an issue that will be listed to be addressed.
A simple work-around seems to be Regenerating the cabinet. Open Construction Settings, then click OK, and the hole pattern will correct itself.
Thanks for the info.
Yes, this is an issue that will be listed to be addressed.
A simple work-around seems to be Regenerating the cabinet. Open Construction Settings, then click OK, and the hole pattern will correct itself.
Thanks for the info.
Ryan Callahan
Thermwood
Dell Precision T3400 / Core 2 Quad Q9400 / 2.4GHz / 8GB RAM / 256MB NVIDIA Quadro FX3450 / Windows 7 x64
Thermwood
Dell Precision T3400 / Core 2 Quad Q9400 / 2.4GHz / 8GB RAM / 256MB NVIDIA Quadro FX3450 / Windows 7 x64