Request - LDE from the Batch List

Josh Rayburn · Post by **Josh Rayburn** » Thu, Apr 22 2010, 12:24PM

O Lords of Thermwood,
You have been kind to us and we thank you for providing us this wonderful software. Might I so humbly request your consideration of the following:
- Could we have the ability to check the handy dandy checkbox next to the item in a batch list, then just click the LDE button to create a drawing of that cabinet?

I thought this would be nice to eliminate the delay of taking items from the batch to the CE only for the purpose of bringing it to the LDE.....
Does anyone have any thoughts on the practicality or possibility of such a request?

jnr

Rick Palechuk · Post by **Rick Palechuk** » Thu, Apr 22 2010, 1:20PM

I would use that feature too.

Bryan J Tanner · Post by **Bryan J Tanner** » Thu, Apr 22 2010, 1:33PM

I think that would be good.

Jon Dieterlen · Post by **Jon Dieterlen** » Sat, Apr 24 2010, 5:10PM

I believe if you click on the cabinet, it will take it to the cabinet editor, from there you can take it to the LDE and make drawings.

Hope that helps.

Jon

Kerry Fullington · Post by **Kerry Fullington** » Mon, Apr 26 2010, 6:00AM

Jon,

I think they are wanting to skip the step of taking the cabinet to the cabinet editor.

Jon Dieterlen · Post by **Jon Dieterlen** » Mon, Apr 26 2010, 8:20PM

I guess I should have read the post. So much for the theory of getting 80% of the good out of 20% of the work.

Jon

Thermwood / eCabinet Systems

Request - LDE from the Batch List

Request - LDE from the Batch List

Re: Request - LDE from the Batch List

Re: Request - LDE from the Batch List

Re: Request - LDE from the Batch List

Re: Request - LDE from the Batch List

Re: Request - LDE from the Batch List